User manual

ELARA 7371000 25.9.98 Page 21
Program Mode
l MEMORY PAGE
This button is used to toggle between the
two pages of memories. The red lights
above the button indicate which page is
currently selected.
NOTES
Preset Faders
In two preset operation, either the PRESET A
or PRESET B faders can be used to set the
levels for channels 1 - 12. Channels 13 -24 will
be recorded at zero. In WIDE operation, the
PRESET A faders are used to set channels 1 -
12 and the PRESET B faders to set channels
13 - 14.
Recording Output Values
It is recommended that the A MASTER, B
MASTER and GRAND MASTER are set to full
(100%) when programming memories.
Otherwise the output values may not be as
expected when the memories are output in
RUN Mode. As current output values are
recorded (not channel fader positions).
DMX Channels
The desk outputs and records all 24 DMX
channels , even if NOT in WIDE.
In NOT in WIDE then channel s 13-24 are
output at zero.