User manual

ELARA 7371000 25.9.98 Page 35
Run Mode
Moving between Sequence Steps
Manually Stepping through a Sequence
1. Ensure that the SPEED control is set
to Manual and the SOUND function is
not active.
2. Press the STEP + button to move to
the next step.
3. Press the STEP - button to return to
the previous step.
Automatically Stepping through a
Sequence
1. Ensure that the SPEED control is not
set to Manual and the SOUND
function is not active.
2. Use the SPEED control to adjust the
rate at which the sequence is
advanced (the sequence speed).
Using Sound Input to Step through a
Sequence
The sequence can be advanced in time
with the bass beat of a suitable music
source, or the basic speed of the
sequence can be set and the bass beat
from the music source used to increment
extra steps.
1. Connect a suitable music source to
the audio input on the desk.
2. Ensure that the SOUND function is
active.
3. To use only the sound to trigger the
sequence, set the SPEED control to
Manual.
4. To use a combination of sound and
automatic, set the basic speed with
the SPEED control.