User manual

ELARA 7371000 25.9.98 Page 5
This Manual
This manual describes the operation and
programming of the Elara lighting desk. It
begins with a general description of the
desk, the master controls, turning on the
desk and the default state. The manual
then covers the different operating modes
of the desk, namely PRESET, PROGRAM
and RUN. Each of these sections contains
a basic description of the relevant front
panel controls and displays, and a step by
step guide to the various functions
available. The SUPER USER functions
and technical specification sections follow.
Throughout this manual, references to
controls, buttons and lights on the front
panel appear in capital letters (eg GRAND
MASTER, PRESET CONTROL).
The Elara Lighting Desk
Is a compact user-friendly memory desk
which records channel levels.
Up to 48 Memories can be saved. The
memories are accessed as two pages of
24 memories, using the PRESET faders
as submasters. The programmed
memories can also be used to program
three sequences (chases) each of which
can contain up to 99 steps. Crossfade
times and chase speed/direction can be
adjusted by the user.
The desk has 12 control channels (24 with
WIDE active). The standard output from
the desk is DMX 512. The control channel
data is output on DMX channels 1 -24
(control ch 1 = DMX ch 1, control ch 2 =
DMX ch 2 etc.)
Options Available:
Analogue output kit Stock No 00-118-00
Memory Module Stock No 00-115.00.