User guide

BitStorm Server host network configuration 3-11
Software Release 3.00 StormTracker-Site Manager and Administration User Guide 08-01148-01-200
Procedure 3-1 (continued)
Configuring the BitStorm Server host network interface
Step Action
The StormTracker Configuration Manager "welcome" screen and command
prompt appear as shown in Figure 3-8.
Figure 3-8
StormTracker Configuration Manager "welcome" screen
4 At the command prompt (OSM#>), type configure
and press <ENTER>. The
system displays the following:
5 Enter the valid host network IP address assigned to the BitStorm Server ETH
0 network interface. The system should appear similar to the following:
—continued—