User guide

3-14 BitStorm Server host network configuration
Software Release 3.00 StormTracker-Site Manager and Administration User Guide 08-01148-01-200
Procedure 3-2
Setting the BitStorm Server date and time
This procedure explains how to use the StormTracker Configuration Manager
date command to set the date and time for the BitStorm Server.
Requirements
To perform this procedure, you need the following:
• a connection to the BitStorm Server ETH 0 network interface using one of
the methods described in “BitStorm Server console connection methods”
on page 3-4. host name for the BitStorm Server
Action
Step Action
1 Login to the BitStorm Server (the steps for logging into the BitStorm Server
are presented in Procedure 3-1 on page 3-10).
2 At the command prompt (OSM#>), type date
and press <ENTER>. The
system should appear similar to the following:
3 Type y
and press <ENTER>. The system should appear similar to the
following:
—continued—