User guide

Using the Database Module 5-5
Software Release 3.00 StormTracker-Site Manager and Administration User Guide 08-01148-01-200
Procedure 5-1
Provisioning EtherLoop modems
Use this procedure to provision any EtherLoop modems installed on the
system. This procedure must be done to before using YesWare to provision
EtherLoop CO modems as switches.
Action
Step Action
1 Using a PC web browser, browse to the IP address configured for the ETH 0
interface, and login to the StormTracker-Site Manager software group.
2 In the Modex Daemon module, configure the Modex daemon interface
according to the system application as described in “Modex Daemon ETH 0
/ ETH 1 interface configuration” on page 5-3.
3 Use the Shelf Add/Search
operation in the Database module to provision any
managed modem shelves in the system as described in “Provisioning
managed shelves” on page 5-4.
4 Select the Discover Modems
operation from the Database module to launch
the "Discover EtherLoop Modems" dialog as shown in Figure 5-3.
Figure 5-3
Discover EtherLoop Modems dialog
—continued—