User`s guide

9-14 YesWare PMS integration
Software Release 2.30 YesWare Applications User’s Guide 08-01016-01
Procedure 9-2
Configuring the PMS Interface
Use this procedure to configure the PMS interface using the Billing Manager
Configure PMS Interface function.
Action
Step Action
1 From the YesWare Main Menu, select the Billing Manager module.
2 Click the Configure PMS Interface
function link to launch the Edit Billing
dialog. See Figure 9-6.
Figure 9-6
Edit Billing interface dialog
3 Use the pull-down menu to select the PMS configuration ("HOBIC AckNak"
or "HOBIC One-Way") required for the local PMS and click the "Next" button.
Note: The "PMS Interface" selection is an internal YWS setting and should
not be edited.
4 Edit the PMS configuration file as necessary for the local PMS.
Note: For guidance in editing HOBIC AckNak configurations, see “HOBIC
AckNak configuration requirements” on page 9-7. For guidance in editing
HOBIC One-Way configurations, see “HOBIC One-Way configuration
requirements” on page 9-12.
STOP
You have completed this task.