User`s guide

YesWare security and administration 13-27
Software Release 2.30 YesWare Applications User’s Guide 08-01016-01
Procedure 13-12
Backing up the InterProxy configuration
When the initial InterProxy configuration is complete (and whenever the
cinfiguration changes thereafter), you should make a backup of the
configuration. Use this procedure to backup the InterProxy configuration to
diskette.
In addition to using this function, the system administrator should use the web-
browser’s print capability to print-out the InterProxy settings for
recordkeeping purposes.
Requirements
To perform this procedure, you need the following:
• A 1.44 MB formatted diskette
Action
Step Action
1 Using a PC web browser, browse to the IP address configured for the ETH 0
interface, and login to the YWS.
2 From the YesWare Main Menu, choose the InterProxy module.
The InterProxy menu appears.
3 Click Backup InterProxy
.
The InterProxy Data Backup dialog appears as shown below.
Figure 13-17
InterProxy Data Backup dialog
—continued—
CAUTION - Possible version conflict
Never restore an older backup copy of InterProxy onto a YWS with a higher version
of the InterProxy module. The Backup InterProxy
function backs up the entire
InterProxy module, not just the data. Restoring onto a higher version of InterProxy
will over-write
the new module version with the old version.