User`s guide

A-16 Remote YesWare Management using SNMP
Software Release 2.30 YesWare Applications User’s Guide 08-01016-01
Table A-10
EloopSwitch Table
Object Name Description Access Syntax
swTableIndex The index for each switch interface. The index
remains constant from one initialization of the
agent to another and uniquely identifies each
switch.
read-only Integer32
swTableStatus The current status of this switch. read-only INTEGER
up
down
polling
swTableNetAddr The Network or IP address of the switch. read-only DisplayString
swTableName The administratively assigned name for the
switch.
read-only DisplayString
swTableLocation The physical location of the switch. read-only DisplayString
swTableParentNetAddr The Network or IP address of the switch that is
the parent of this switch in the network
hierarchy.
read-only DisplayString
swTableUpTime The time (in hundredths of a second) since the
network management portion of the switch was
last re-initialized.
read-only TimeTicks
swTableTrapStatus The status of sending traps for this switch.
Descriptions for the options are given below.
trapsOn– all traps are on (enabled) for this
modem.
trapsOff – all traps are off (disabled) for this
modem.
switchDownTrapOff – the switchDown trap is
off (disabled) for this switch. The switchUp trap
is enabled. enabled.
read-write INTEGER
trapsOn
trapsOff
(3)
switchDownTra
pOff