Specification

The information on these sheets has been compiled from the results of various test data.
This publication however, cannot be considered as a commitment or as a written guarantee by OSBE BV.
The information presented cannot replace the necessity of serious testing of the product in its actual
application.
is a worldwide patented system.
TECHNICAL SPECIFICATION ELASTILON® STRONG
MATERIAL PROPERTIES
P.E. Foam
Quality:
Chemically cross-linked Polyethylene
Density:
50 kg/m³
Tensile strength (longitudal):
0,60 N/mm²
Elongation (longitudal):
160%
Service temperature:
-80°C / +100°C
Thermal conductivity:
0,038 W/mK (at 0°C)
Water absorption:
< 0,4% (after 7 days)
< 0,6% (after 28 days)
Compression set at 25% compression:
3% (22 hrs, 23°C; after 24 hours relaxation)
Resistance to compression at 30% compression:
55 kPa
No fungus building
Free of CFK’s
Adhesive
Adhesive thickness:
0,15 mm
Adhesive weight:
80 g/m³
Adhesion (N/25 mm):
18 N
Static shear resistance (25 mm x 25 mm):
500 g/25 mm²
Temperature limitations
Application:
+10°C minimum
Service:
-50°C / +100°C
Short peak:
+120°C
Ageing resistance:
very good
Storage:
2 years @ 21°C, 50% relative humidity,
no direct sunlight/ strong artificial light