Integration Manual

LIST OF ANTENNAS

The modular transmitter exclusively uses the chip antenna 450AT18A100 manufactured by Johanson Technology, Inc. This chip

antenna is integrated on the modular transmitter board as part of the assembly. For details of the specifications see appropriate data

sheet. Using another antenna voids the FCC authorization to operate the modular transmitter.

RF EXPOSURE CONSIDERATIONS

(1) The modular transmitter should not be used within 5 mm of the human body (closest separation between the radiating parts of

the device (e.g. antenna) and the user or nearby persons).

This device complies with the RF exposure SAR test exclusion requirements for portable devices if a minimum separation distance

of 5 mm is kept. It also complies with the RF exposure requirements for mobile and fixed devices.

However, the device shall be used in such a manner that the potential for human contact during normal operation is minimized.

Note:

In (2) the text “if a minimum separation distance of 5 mm is kept” may be omitted if this distance is already kept by installation e.g.

into a cabinet.