User Manual

DMX OPERATOR PRO

7.5.3 Delete Moving Light Shows

(1) Press and hold down the "RECORD" button for three (3) seconds or until the green

LED next to the RECORD button comes on. The LCD will display the following:

SELECT A SCENE

OR SHOW! PAGE01

(2) Select the “SHOW” button 1-8, that you wish to delete. The selected SHOW LED will

flash repeatedly. For example, if you select SHOW #1, the LED above the #1 SHOW

button will flash repeatedly and your LCD will display the following:

EDIT SHOW1/TLXX

ADD ESC STEPXX

• TLXX = Total Show steps.

(3) Press and hold down the same “SHOW” button then press the “DEL” button one (1)

time. The LCD will momentarily display “DEL ONE PROGRAM PLEASE WAIT….”

Once the Show has been deleted from memory, the LCD will display the following:

EDIT SHOW1/TL00

ADD ESC STEP00

• TL00 = Indicates that there are zero (0) steps in this Show.

(4) At this point you can record a new Show on the same Show button or press “ESC”

one (1) time and repeat steps 2 & 3 to delete additional Shows.

(5) To exit Show delete mode, press “ESC” two (2) times.