User Manual

DMX OPERATOR PRO

8.6 Display Mode Set Up (Cont.)

(2) Press the "DOWN" button three (3) times so that the cursor is now flashing over the

# 4 "DISPLAY MODE." option. The LCD will display the following with the cursor box

now flashing over the # 4 option.

3. P/T FADE ONLY

4. DISPLAY MODE

(3) Press the "Record" button to enter the DISPLAY MODE option. The LCD will display

the following:

DISPLAY MODE:255

OK ESC SEL ADJ

(4) Use the "UP" or “DOWN” button to change the mode from 255 to 100 or vice versa.

(5) Once changed, press the “RECORD” button to confirm and store your new setting.

(6) Press the “ESC” button two (2) times to exit.