User Manual

DMX OPERATOR PRO

Section: 6 Basic Control Parts (Cont.)

• ONE/MIX/SEQ button:

This button is used to select between the three modes for the Par Can section.

• Speed Fader:

This fader is used to adjust a desired hold rate during playback.

• Fade Fader:

This fader is used to adjust a desired fade time during playback.

• Audio Fader:

The Audio fader is used to adjust the internal microphones sensitivity for Par Can Chase playback.

• Master Fader:

The Master fader is used to proportionally control the output for Par Can channels 129-136.

6.2 Rear panel

• POWER ON / OFF :

The Power switch is used to turn the console ON and OFF.

• DC INPUT :

DC 9 ~15V, 500mA min. Power Supply (Included)

• AUDIO LINE INPUT :

0.1V~1Vp-p. RCA line level input.

• DMX polarity select

Use this switch to select desired DMX polarity (2-,3+ / 2+,3-).

• DMX OUT :

3 pin XLR output to send DMX data to fixtures.

• MIDI IN :

This input receives MIDI information from a MIDI device.

• FOG MACHINE INPUT :

Connect a compatible fog machine for on board monitoring and triggering.

• CF CARD socket:

The CF card socket is for our optional compact flash card used to store and exchange information.

The model number for the optional CF card is “32MB/CARD”. (The card is proprietary and only

available through any Elation Professional authorized dealer).

• EXT STEP CONTROL INPUT :

This input is for an optional external foot controller. The model number for the optional foot

controller is “DMX PRO-FC”. Available through any Elation Professional authorized dealer.