Platinum Spot 5R Elation Professional 6122 S Eastern Ave Los Angeles, Ca 90040 www.elationlighting.com Rev. 11/10/2010 - visage Version 1.
Platinum Spot 5R™ ©Elation Professional, Los Angeles Ca. 2 www.ElationLighting.
Platinum Spot 5R™ CONTENTS 1. General Information……………………………………………………………………… 4 a. Introduction………………………………………………………………………. 4 b. Unpacking………………………………………………………..…………..….. 4 c. Customer Support…………………………………………….………………… 4 d. Warranty Registration……………………………………………………..……. 5 e. Discharge Lamp Warning………………………………………………………. 5 2. Safety Instructions………………………………………………………........…………. 7 3. Features…………………………………………………………………………………… 9 4. General Guidelines………………………………………………………………………. 10 5.
Platinum Spot 5R™ 1. GENERAL INFORMATION INTRODUCTION: Congratulations, you have just purchased one of the most innovative and reliable lighting fixtures on the market today! The Platinum Spot 5R™ has been designed to perform reliably for years when the guidelines in this booklet are followed.
Platinum Spot 5R™ Please do not discard the shipping carton in the trash. Please recycle whenever possible. WARRANTY REGISTRATION: The Platinum Spot 5R™ carries a two-year (730 days) limited warranty. Please fill out the enclosed warranty card to validate your purchase. All returned service items whether under warranty or not, must be freight pre-paid and accompany a return authorization (R.A.) number. The R.A. number must be clearly written on the outside of the return package.
Platinum Spot 5R™ Avoid switching the fixture on and off repeatedly in short intervals, as this will reduce lamp life and intensity. To achieve the intensity associated with discharge lamps, these lamps use a gas sealed in a high-pressure environment to emit a brilliant output. Due to the high pressure involved with the construction of the lamp, the lamp may explode during prolonged extensive use. This risk is increased with age; added care is encouraged when dealing with older lamps.
Platinum Spot 5R™ 2. SAFETY INSTRUCTIONS The Platinum Spot 5R™ is an extremely sophisticated piece of electronic equipment. To guarantee a smooth operation, it is important to follow the guidelines in this manual. Elation will not accept responsibility for damages resulting from the misuse of this fixture due to the disregard of the information printed in this manual. 1. Always be sure that the fan and the air inlets remain clean and are never blocked.
Platinum Spot 5R™ may increase the risk of damage and/or personal injury. 10. To reduce the risk of fire or shock, do not expose this fixture to rain or moisture. 11. Do not attempt to operate this fixture if the power cord has become damaged or frayed. Important Notice: Damages resulting from the disregard of safety and general user instructions found in this user manual are not subject to any warranty claims.
Platinum Spot 5R™ 3.
Platinum Spot 5R™ 4. GENERAL GUIDELINES This fixture is a professional lighting effect designed for use on stage, in nightclubs, in theatres, etc. Do not attempt operation or installation without a proper knowledge on how to do so. This fixture was designed for indoor use only. Consistent operational breaks may ensure that the fixture will function properly for many years to come. Do not shake the fixture around. Avoid brute force when installing or operating the device.
Platinum Spot 5R™ 5. FIXTURE OVERVIEW 1: Lens 2: Display 3: DC Switch 4: Microphone 5: Left Button 6: Down Button 7: Right Button 8: Mode/Esc Button 9: Up Button 10: Enter Button 11: Handle 12: Lamp Access Panel 13: 3-Pin DMX in 14: 3-Pin DMX out 15: 5-Pin DMX in 16: 5-Pin DMX out 17: Power Cord 18: Fuse ©Elation Professional, Los Angeles Ca. 11 www.ElationLighting.
Platinum Spot 5R™ 1. Lens – Main output lens. 2. LED Menu Display – Full color animated menu display. 3. DC Switch - Controls menu and display power when the unit is disconnected from main power. 4. Microphone – This microphone receives external low frequencies to trigger the unit in Sound-Active mode. This microphone is designed to receive low frequency sounds only, tapping on the microphone and high pitch sounds may not trigger the unit. 5.
Platinum Spot 5R™ 13. 3-PIN DMX Input Jack – This jack accepts an incoming DMX signal via a male, 3-pin XLR jack. 14. 3-Pin DMX Output Jack – This jack is used to send an incoming DMX signal to the next fixture in the DMX chain via a female, 3-pin XLR jack. 15. 5-PIN DMX Input Jack – This jack accepts an incoming DMX signal via a male, 5-pin XLR jack. 16. 5-Pin DMX Output Jack – This jack is used to send an incoming DMX signal to the next fixture in the DMX chain via a female, 3-pin XLR jack. 17.
Platinum Spot 5R™ 6. LAMP INSTALLATION INSTRUCTIONS Installing or replacing the lamp For a proper and safe lamp change, please read this chapter carefully and follow all instructions. Lamp Protection Circuitry Because of the nature of the extremely short gap of the Platinum 5R Lamp and the tight nature of the internal optical system it is imperative that the lamp be replaced every 2000 hours.
Platinum Spot 5R™ the replacement lamp meets or exceeds the original lamp specifications, failure to do so may damage the fixture and void the manufactures warranty. • Be sure to follow all the lamp handling procedures included with the new lamp. Never handle the new lamp with your bare hands as the oils from your skin may damage the lamp and cause premature lamp failure. Installation Procedure: 1. Set the fixture on a flat surface and remove the two screws marked “A” and “B”. 2.
Platinum Spot 5R™ B. Once at “Information” tap the “Enter” button anduse the “Up” or “Down” buttons to toggle to “Time Information” C. Once at “Time Information” us either the “Up” or “Down” buttons to toggle to “L-Timer Password” and tap the “Enter” button. Then use the “Up” or “Down” buttons to enter the reset pass code, “038” and tap the “Enter” button once again. The display will automatically revert to “L-Timer Password,” next toggle down to “Clear Lamp Time” D.
Platinum Spot 5R™ 7. MOUNTING AND INSTALLATION Cautions: For added protection mount the fixtures in areas outside walking paths, seating areas, or in areas were the fixture might be reached by unauthorized personal. Before mounting the fixture to any surface, make sure that the installation area can hold a minimum point load of 10 times the device’s weight. Fixture installation must always be secured with a secondary safety attachment, such as an appropriate safety cable.
Platinum Spot 5R™ Mounting points Overhead mounting requires extensive experience, including amongst others calculating working load limits, a fine knowledge of the installation material being used, and periodic safety inspection of all installation material and the fixture. If you lack these qualifications, do not attempt the installation yourself. Improper installation can result in bodily injury. CAUTION! Be sure a qualified electrician performs all electrical connections.
Platinum Spot 5R™ Clamp Mounting The Platinum Spot 5R™ provides a unique mounting bracket assembly that integrates the bottom of the base, the included “Omega Bracket,” and the safety cable rigging point in one unit (see the illustration below). When mounting this fixture to truss be sure to secure an appropriately rated clamp to the included omega bracket using a M10 screw fitted through the center hole of the “omega bracket”.
Platinum Spot 5R™ 8. UNDERSTANDING DMX DMX-512: DMX is short for Digital Multiplex. This is a universal protocol used by most lighting and controller manufactures as a form of communication between intelligent fixtures and controllers. DMX allows all makes and models of different manufactures to be linked together and operate from a single controller. This is possible as long as all the fixtures and the controller are DMX compliant.
Platinum Spot 5R™ Be sure to follow the above figure when making your own cables. Do not use the ground lug on the XLR connector. Do not connect the cable’s shield conductor to the ground lug or allow the shield conductor to come in contact with the XLR’s outer casing. Grounding the shield could cause a short circuit and erratic behavior.
Platinum Spot 5R™ DMX-512 connection with DMX terminator A DMX terminator should be used in all DMX lines especially in longer runs. The use of a terminator may avoid erratic behavior in your DMX line. A terminator is a 120 ohm 1/4 watt resistor that is connected between pins 2 and 3 of a male XLR connector (DATA + and DATA -). This fixture is inserted in the female XLR connector of the last fixture in your daisy chain to terminate the line.
Platinum Spot 5R™ channel number from which the fixture starts to “listen” to the digital control information sent out from the DMX controller. The allocation of this starting DMX address is achieved by setting the correct DMX address on the digital display located on the base of the fixture. You can set the same starting address for all fixtures or a group of fixtures, or set different address for each individual fixture.
Platinum Spot 5R™ 9. FIXTURE MENU On-Board System Menu: The Platinum Spot 5R™ comes with an easy to navigate, full color system menu. This next section will detail the functions of each command in the system menu. LED Control Panel: The control panel located on the base of the fixture allows you to access the main menu and make all necessary adjustments to the Platinum Spot 5R™. During normal operation, tapping the “MODE/ESC” key once will access the fixture’s main menu.
Platinum Spot 5R™ Information Function Mode Default settings shaded.
Platinum Spot 5R™ Effect Adjust Reset Function Display Setting Temperature C/F Key Lock Celsius/ Fahrenheit Initial Effect PAN =XXX Reset Default Reset All Reset Pan&Tilt Reset Colors Reset Gobos Reset Shutter Reset Others ON/OFF Test Channel Manual Control PAN …… PAN =XXX : Calibrate Password Color wheel=XXX : Calibrate Values Users Mode Set User Mode Edit User Mode Select Programs Edit Program Low Fans Speed Shutoff Time Display Reverse Edit Program Edit Scenes 02~60m 05m ON/OFF Disp
Platinum Spot 5R™ Rec. Controller XX~XX Scenes recorded external source from 9.1 Function Mode: 9.1.1 “Set DMX Address” - DMX address setting – This function is used to set or adjust the fixture’s starting DMX address. Every device controlled by DMX has to have a unique starting address. The addressing feature is what allows DMX to function properly. The DMX address of a fixture is what allows it to communicate with a controller properly.
Platinum Spot 5R™ 9.1.5 Music control This function is similar to the “Auto Program” described in the previous section with the exception that this function will advance the built-in program via sound. 9.2 Information: 9.2.1 Time information These functions will detail different time functions associated with the fixture. Current Time This function displays the running time of the fixture from the last power on.
Platinum Spot 5R™ Clear Last Run This function will allow the “Last Run Hours” function be cleared and reset. L-Timer Password Use this function to enter the “Clear Lamp Time” password. Password is “038” Clear Lamp Time This function resets the lamp “ON” time to zero. Please reset the lamp “ON” time at every lamp replacement. This procedure tracks the lamp running time so the lamp can be replaced at the end of it’s recommended duty cycle. • Select “Clear lamp time” in the system menu.
Platinum Spot 5R™ 9.3.3 Lamp On Via DMX When engaged, this function will allow the lamp to be switched “on” via a DMX controller. Select “ON” to enable this function or “OFF” to disable it. 9.3.4 Lamp Off Via DMX When engaged, this function will allow the lamp to be switched “off” via a DMX controller. Select “ON” to enable this function or “OFF” to disable it. 9.3.5 Lamp On at Temp. The fixture is designed to shut the lamp off when an excessive temperature is sensed inside the head by the on-board CPU.
Platinum Spot 5R™ is turned off or begins receiving a new DMX signal. If the fixture is turned on without any DMX signal, the fixture will automatically go in to sound-active mode. Available settings are: “Close” – Shutter flags will close. “Hold” – Fixture will remain at it’s last settings. “Auto” – Fixture will go into stand-alone mode, running the built-in program. “Music” – The fixture will go into sound-active mode. Pan Reverse - This function allows you to invert all pan movements.
Platinum Spot 5R™ Mic Sensitivity – This function makes the internal microphone more or less sensitive to sound. This function only works in conjunction with the sound active modes. The default setting is 70% and setting range from 0% to 99%. Hibernation – When activated, this function will automatically put the fixture in power stand-by mode after a defined period of time of no DMX activity.
Platinum Spot 5R™ LOCK – This function allows you to lock the keys on the display to prevent menu tampering. With this function you can activate the automatic keylock function. If this function is activated, the keys will be automatically locked in 15 seconds from the last command. In order to deactivate or temporarily deactivate the keylock function, press the Mode/Esc Button for 3 seconds to regain access to the menu commands. 9.4.
Platinum Spot 5R™ 9.6 Effect Adjust: 9.6.1 Test Channel – This menu function allows the user to select each individual fixture channel and test it’s function independently from the control board. 9.6.1 Lamp adjustment (manual control) – This function readies the fixture for lamp optimization in a simple single step procedure. This function will center the pan and tilt motors and at the same time open the shutter and bring the dimmer to 100%.
Platinum Spot 5R™ Programs can be created and stored using the fixture’s control board or by using an external DMX controller. For detailed instructions on how to complete this task please see Section 12/ Page 39. 9.8.1 Select program – This function allows the user to select one of ten of the user defined built-in programs. This program is then accessed in “Function Mode” under “Program Run.” 9.8.2 Edit program – This function allows the user to edit the built-in programs. 9.8.
Platinum Spot 5R™ 10. DMX ADDRESSING Setting the DMX address - After the fixture is turned “ON” it will immediately complete a reset process that test all the fixture’s functions. When the reset process concludes the LCD will display the fixture’s current DMX. If the fixture is not receiving a DMX signal, the display will flash continuously. To set or adjust a DMX address, please follow the procedure below: 1. Toggle through the menu by pressing the Up and Down buttons until the display reads “Address=XXX.
Platinum Spot 5R™ Controller Settings: 1. Set the DMX value of channel 1 to a value of 7. 2. Set the DMX value of channel 2 to a value of 7 or 8. When channel 2 is set to "7" you can adjust the starting address between 1 and 255. When set to "8" you can adjust the starting address between 256 and 511. 3. Use channel 3 to set your desired DMX starting address.
Platinum Spot 5R™ 11. OPERATION Operating Modes: The Platinum Spot 5R™ can operate in six different modes. This next section will detail the differences in the operating modes. • Auto Program Mode (Master) - The fixture will chase through the built-in programs, sending a DMX control signal to all other fixtures connect via DMX cables instruction for a synchronized light show. • Auto Program Mode (Stand-alone) - The fixture will chase through the built-in program.
Platinum Spot 5R™ Control” submenu. See page 24 for the menu breakdown. Once in the “Music Control” submenu select “Alone” 11.2 Master/Slave Operation (Auto Program or Music Control): This function allows up to 16 fixtures to be linked together to provide a synchronized light show without the use of a controller. Only use this when linking several Platinum Spot 5Rs together for use without a controller. Any fixture can act as a “Master or a “Slave.
Platinum Spot 5R™ 12. WORKING WITH BUILT-IN PROGRAMS The fixture comes equipped with a built-in DMX recorder that allows custom programs to be installed and recalled directly from the fixture’s control board. Programs can be created and stored using the fixture’s control board or by using an external DMX controller. The following instructions will detail the procedures for using the on-board system menu as well as using a DMX compliant controller.
Platinum Spot 5R™ - “PAN-Fine” – precision pan movement. - “TILT” – tilt movement. - “TILT-Fine” – precision tilt movement - “Move Speed” – adjust pan and tilt motor speed - “Gobo Wheel 1” – select gobos from gobo wheel 1 - “Gobo Rot. 1” – adjust gobo 1 indexing or rotation - “Gobo Wheel 2” – select a gobo from gobo wheel 20 - “Prism” – select a prism, prism macro, or frost - “Prism Rot.
Platinum Spot 5R™ The control will store a maximum of 10 programs. A program can store one or a maximum of 64 scenes. Keep in mind that a scene can only be access when it is stored inside one of the 10 available programs. Follow the procedure below to build an internal program: • Access the main menu and toggle to “Edit Programs” which is menu function 8. • Then tap the “ENTER” button and toggle to “Program 1” menu function 8-2-1. • When you get to the “Program 1” function tap the “ENTER” button.
Platinum Spot 5R™ 13. DMX CHANNEL TRAITS: The chart below details the channel layout for 17 DMX channels (default). In 8bit mode the “Pan Fine” and “Tilt Fine” channels are not used, thus converting the fixture into a 15-channel DMX fixture. In extended mode the fixture will use 24 DMX channels (second chart).
Platinum Spot 5R™ 70-83 84-97 98-111 112-127 128-189 190-193 194-255 6 6 7 4 5 7 8 9 8 6 0-255 0-9 10-19 20-29 30-39 40-49 50-59 60-69 70-79 80-89 90-104 105-119 120-134 135-149 150-164 165-179 180-194 195-209 210-255 0-127 128-189 190-193 194-255 0-255 10 0-7 8-15 16-23 24-31 Color 5 Color 6 Color 7 Color 8 Forwards rainbow effect from fast to slow No rotation Backwards rainbow effect from slow to fast Color Wheel Fine: Color Wheel color change to any position (Fine) Rotating gobos, cont.
Platinum Spot 5R™ 32-39 40-47 48-55 56-63 64-71 72-79 80-87 88-95 96-103 104-111 112-119 120-126 127-133 134-140 141-147 148-154 155-161 162-168 169-175 176-182 183-189 190-196 197-203 204-210 211-217 218-255 11 9 7 0-255 12 0-31 32-127 128-135 136-143 144-151 152-159 160-167 168-175 176-183 184-191 192-199 Gobo 4 Gobo 5 Gobo 6 Gobo 7 Gobo 8 Gobo 9 Gobo 10 Gobo 11 Gobo 12 Gobo 13 Gobo 14 Gobo 1 shake slow to fast Gobo 2 shake slow to fast Gobo 3 shake slow to fast Gobo 4 shake slow to fast Gobo 5 shak
Platinum Spot 5R™ 200-207 208-215 216-223 224-231 232-239 240-247 248-255 10 8 13 14 11 9 15 16 12 10 17 13 11 18 19 14 12 20 21 15 13 0-127 128-189 190-193 194-255 0-255 0-255 0-255 0-31 32-63 64-95 96-127 128-159 160-191 192-223 224-255 0-255 0-255 0-191 192-223 224-255 0-255 22 0-191 192-223 Macro 10 Macro 11 Macro 12 Macro 13 Macro 14 Macro 15 Macro 16 Rotating prism, Prism / Gobo macros: Prism indexing Forwards prism rotation from fast to slow No rotation Backwards prism rotation
Platinum Spot 5R™ 16 14 23 17 15 24 224-254 Pulse closing slow to fast 255 Max.
Platinum Spot 5R™ 14. ERROR CODES: When power is applied, the unit will automatically enter a “reset/test” mode. This mode brings all the internal motors to a home position. If there is an internal problem with one or more of the motors an error code will flash in the display in the form of “XXer” were as XX will represent a motor function. For example, when the display shows “Pan-ER,” it means there is some type of error with the pan motor.
Platinum Spot 5R™ defective motor IC drive on the main PCB). Color-wheel error: The color wheel is not located in the default position after start-up or after a reset command. This message will appear after a fixture reset if the color wheel’s magnetic-indexing circuit malfunctions (sensor failed or magnet is missing) or there is a stepper motor failure (defective motor or a defective motor IC drive on the main PCB).
Platinum Spot 5R™ malfunctions (sensor failed or magnet missing) or the stepping-motor is defective (or its driver circuit on the main PCB). The Iris wheel is not located in the default position after the reset. Focus-error: This message will appear after the reset of the fixture and if the magnetic indexing circuit malfunctions (sensor failed or magnet missing) or the stepping-motor is defective (or its driver circuit on the main PCB).
Platinum Spot 5R™ 15. CLEANING AND MAINTENANCE The following points have to be considered during the inspection: 1. Be sure all screws and fasteners are securely tightened at all times. Lose screws may fall out during normal operation resulting in damage or injury as larger parts could fall. 2. There must not be any deformations on the housing, color lenses, rigging hardware and rigging points (ceiling, suspension, trussing). Deformations in the housing could allow for UV radiation leakage.
Platinum Spot 5R™ 16. PHOTOMETRIC DATA: ©Elation Professional, Los Angeles Ca. 52 www.ElationLighting.
Platinum Spot 5R™ 17. GOBOS: ©Elation Professional, Los Angeles Ca. 53 www.ElationLighting.
Platinum Spot 5R™ 18. DIMENSIONAL DRAWINGS: ©Elation Professional, Los Angeles Ca. 54 www.ElationLighting.
Platinum Spot 5R™ 19. CIRCUIT SCHEMATICS ©Elation Professional, Los Angeles Ca. 55 www.ElationLighting.
Platinum Spot 5R™ 20. 2-YEAR LIMITED WARRANTY A. Elation Professional® hereby warrants, to the original purchaser, Elation Professional® products to be free of manufacturing defects in material and workmanship for a period of two years, (730 days) from the date of purchase. This warranty shall be valid only if the product is purchased within the United States of America, including possessions and territories.
Platinum Spot 5R™ effect. E. Elation Professional® reserves the right to make changes in design and/or improvements upon its products without any obligation to include these changes in any products theretofore manufactured. F. No warranty, whether expressed or implied, is given or made with respect to any accessory supplied with products described above.
Platinum Spot 5R™ 21. TECHNICAL SPECIFICATIONS Power supply Power Requirements Fuse Protection Power Consumption 120v/60Hz 120V = 5A/250V, GMA (5x20mm fine-wire fuse) 220V = 3.
Platinum Spot 5R™ Tilt - movement 270° in max. 1.5 seconds, 16 bit resolution Weights and Measures Width of the base 18” / 46cm (Including Handles) Length of the base 13.75” / 35cm (Without Handles) Width of Head 18.5” / 47cm Height (head vertical) 25” / 63.5cm Weight (net) 14.8 Kgs / 33 Lbs Operating Noise Levels (Base level 46.8dB) Mode: Auto 1m = 55.9 dB Mode: High 1m = 56.2 dB Mode: Auto 1m = 51.6 db (Lamp off) Ambient Operating Temperature -25˚C ~ 45˚ C Specifications subject to change without notice.
Platinum Spot 5R™ Elation Professional 6122 S. Eastern Ave. Los Angeles, CA. 90040 323-582-3322 / 323-832-9142 fax www.ElationLighting.com / Info@ElationLighitng.com ©Elation Professional, Los Angeles Ca. 60 www.ElationLighting.