Architectural Recorder System AR-32P ARCHI RECORDER (Junction Box) LAN-cable(RJ-45) AR-32C AR -3 2 Re m ot e ARCHI RECORDER (Controller) User's Manual BOM:24-004-1953-00 Manual Version:1.2 Software Version:2.04 Elation Professional R 4295 Charter Street Los Angeles CA. 90058 www.elationlighting.
Table of Contents AR-32C Page1~Page3 AR-32P Page4 AR32 Configuration Software Operating Guide Page5~Page10
About AR-32 Architecture Recorder System Introduction: Thank you for your purchasing the Elation Professional AR 32-Architectural Recorder System. To optimize the performance of this product, please read these operating instructions carefully to familiarize yourself with the basic operation of this system. The Elation AR-32 is simple to use, architecture recorder system. All system components have been tested at the factory before being shipped to you.
About AR-32C Main Features Wall mounting & free standing available. With USB port to communication with PC for linking use Real time triggering your desired shows individually. Up to 248 files but not over 128M recorded in memory to control DMX signal files. Ability of up to 32 shows are available to be configured separately by performing AR32 configuration software on PC. DMX Controlling Mode and Time Trigger Mode and Manual Mode available for playback shows.
Operation on AR-32 Remote 1.Auto/Manual mode Press and hold Auto/Manual button down for more 2 seconds to access Auto or Manual function mode. The red indicator indicates the Auto function mode is currently engaged and the blue one illuminates in the Manual function mode. In Manual mode, user enable to close the current show by pressing and holding OFF button for more 2 seconds until its indicator illuminates. In Manual Mode, Shows assignments in Pages may refer to the following table: 2.
About AR-32P About AR-32P This product of AR-32P ARCHI Recorder with DMX in & out interface, is a tension provider and a junction box in the AP-32 system, and can be used via a combination with AR-32C. Warning 1.The ground connection should be so essential for this unit. 2.Keep the unit dry, do not expose it to water or high levels of humid. 3.Do not open this unit, there is no user serviceable par t inside-Risk Of Electric Shock! 4.Turn off the power if not using this unit for a long time. 5.
AR-32 Configuration Software Operating Guide Introduction AR-32 Configuration Software is professional configuration application software for AR-32 System with the built-in real time clock. Many functions enables to be configured for AR-32C through running this software via linking AR-32C on PC. Additionally, Manual Mode, DMX Control Mode and Time Trigger Mode are available to playback shows. Getting started In Windows, click the Start button and go to the "Programs" then "AR-32 Configuration Software".
1.1 Select your desired flash file with extension .swf and click "OPEN" icon, the selected file will be successfully linked with the icon in the MEMO option and the file name icon will also appear in the MEMO option. 1.2 And click the icon in the MEMO option to play the selected file. Additionally, you can play the selected file by pointing to the flash file after clicking the "OPEN FLASH" icon on the right upper. 1.3 And the flash effect will appear in the presentation bar.
And hereinafter is before clicking "Edit Show" icon, the left bar of the icon is empty. Hereinafter is the screen after clicking the icon. 4.7User can set up DMX initial address for AR-32C receiving in DMX Address bar and Fade Time( through previous flash file to the next flash file), And use can also change these settings upon requirement. After some settings are satisfied, click "Download to Keypad" icon to download into your AR-32C. 4.8How to Edit Show? 4.8.
5.Event Edit Option: In this option, user can access Time Trigger Mode for playing back SHOW by editing show events to AR-32C, including Weekly Mode, Daily Mode and Date Mode. Commonly, the Date Mode will take precedence of the Daily Mode, and the Daily Mode will take precedence of the Week Mode. For example, If you have set up three events(A1, A2 and A3) to be done within one day, and A1 will in the Date Mode, A2 in the Daily Mode, A3 in the Week Mode.
5.5Then secondarily click the Down Arrow under the "Event Start" icon to select the ending time of playing back the desired SHOW. 5.6And if you're satisfied with your settings, click the "Save" icon to save.
5.7And repeat Step5.1~Step5.6 to edit other shows events. 5.8If you're satisfied with these settings, user can download edited shows events into your AR-32C by clicking the "DownLoad Event" icon. 5.9In like manner, user can readout these desired shows events in AR-32C and amend upon requirement. 5.10And user want to update your AR-32C time by clicking the "Set Time" icon. How to Exit the Software? User can exit the software operation system by clicking the "EXIT" icon when the settings have been conformed.