IMAGE PRO 300 OWNER'S GUIDE English Version 2.
General Information Unpacking: Thank you for your purchase of this product. Every product has been thoroughly tested and carefully packed before delivery. Unpack the shipping carton carefully, saving the carton and all packaging materials for possible later use. Check carefully for sure your product is not damaged and all accessories not missing. If your product appears to be damaged or missing, please do not use it and contact your authorized dealer immediately.
I . S . P. 3 0 0 Main Features [ [ [ [ [ [ [ [ [ [ [ [ 2 Powerful communication tool to create maximum and lasting visual image Die-cast and extruded aluminum finish Forced fan cooling system Twin lens condenser, spherical reflector and external standard lens(1:2.
Introduction ImagePro300 is a modular system designed specially for image spot. This spot is fitted with a 300 Watt HTI 300 arc lamp which has a light output of 20,000 lumens at lens. Two low voltage electrified guides(24 V) with short-circuit protection are equipped with this fixture to accept the user's choice of lens unit and optional accessories for different effects and various combinations. The effects can be either static or motorized for stationary and moving images.
Preparation First time setup 1. Unpack the shipping container carefully, assemble the accessories to fit in their right positions for proper attachment. 2. This unit can be hung or placed in any safe, secure surface by means of its adjustable mounting bracket. 3. When you are sure this unit is ready for operation, plug this unit into the appropriate AC outlet. Warning! The installation should be done by qualified staff only. Lens Focusing 1. Hang the fixture in your final desired position. 2.
Lamp Replacement Metal Halide Lamp Warning! This fixture is fitted with a metal halide lamp which is highly susceptible to damage if impro[erly handled. Do not touch the bulb of the lamp with bare fingers(this can cause damages). The lamp contains small quantities of materials that will be harmful to the envionment, please dispose of the damaged lamp properly. To replace the lamp 1. Disconnect the fixture from power and allow the lamp to cool. 2. Loosen the two knurled screws and remove the top cover. 3.
Operation Guide This is a High-Tech product. When you are sure you have set up this unit properly, you can operate this unit freely. 1. Always be sure to mount this unit in the area that will allow proper ventilation. 2. Check that the local power outlet match that of the required voltage of your unit. 3. Plug this unit into the AC power outlet, turn the switch on. 4. The lamp will be lit and the cooling fan will start immediately.
Fixed Gobo Holder & 6 Metal Gobos The ImagePro-300 comes with a fixed gobo holder and 6 metal gobos. These 6 metal gobos are illustrated as follows: (Dia. 51.5 mm) fixing plate supporting plate metal gobo mounting Gobo pattern & Image The mirror on the wall, floor etc. is subject to the gobo pattern. Please note the gobo pattern should be inverted so that the image can be acceptable.
Accessories and Effects The ImagePro-300 is specially designed to meet the demand for clarity of images in a wide variety of applications including exhibitions, retail environments, leisure, promotions and entertainment venues. Model No.: Image-IP3 Adjustable pivoting mirror (Sold separately) Rotating gobo: dichroic/photographic (diam. 51.8 mm) Rotating gobo: metal (diam. 66 mm) Model No.: Image-IP2 Rotating/ Static gobo holder (Sold separately) Static gobo: metal (diam.
Technical Specifications Overall Size: Net Weight: Standard Lens: Lamp Type: Lamp Base: Norminal Lamp Life: Total Lumen Output: Color Temperature: Mains Supply: Power Outlet: Power Consumption: Fuse(fast acting) Cooling: Accessories(optional): 600x240x290mm (Dimensions with bars and brackets) 10.3Kg 1:2.
24-004-0779 Rev 2.0 April 2003 E-mail: support @ elationlighting.com Http: www.elationlighting.