user manual

Elation Professional® www.elationlighting.com - Trio-1248 - Page 12
Single scene mode. Activate the Single Scene key once to change the indicator to yel
low which means the console is running on the current fader settings. Activate the Single Scene key
a second time to switch to Single Scene mode-indicated by the green backlite.
4.1.2 Fade A and Fade B Settings
1. Activate Softkey A to choose and highlight “Fade A”.
2. Adjust Step Rate fader to set the Fadetime for Preset A.
3. Deactivate Softkey “A”.
-Just as above, Activate Softkey C to choose and highlight “Fade B” and set a desired fade time
using the Step Rate fader.
TRIO-1248 OPERATION - SINGLE SCENE MODE
TRIO-1248 OPERATION - TWO SCENE MODE
4.2 Two Scene Mode
1. When Two Scene Mode is entered by pressing the Two Scene key, the LCD Screen will show this
display:
The Channel Faders on the page represent Scene A and Scene B
Faders 1-12 control Scene A
Faders 13-24 control Scene B
When Preset A and B Faders are in the Top position, the LCD will perform Scene A and Fade out of
Scene B. When the Preset A and B Faders are in the bottom position, the LCD will perform Scene B
and fade out of Scene A.
Pushing A and B Preset Faders simultaneously allows smooth transition between Scenes.
2. If it is desired to switch into Two Scene Mode from another work mode, the user may do so in the
same fashion as Single Scene Mode.
2.1. CrossFade
2.2. Shortcut
-Refer to the details in Single Scene Mode.