user manual

Elation Professional® www.elationlighting.com - Trio-1248 - Page 13
TRIO-1248 OPERATION - SUBMASTER MODE
4.3 SubMaster Mode
When SubMaster mode is activated, the LCD Screen will show this display:
In this mode a total of 1152 Submasters are available - 24 pages x 48 Submasters per page.
1. Recording Submasters
Submaster Mode allows you to record a scene or look into each fader.
1.1 To record a Submaster, the console must either be in Single Scene Mode or Two Scene Mode.
While in either Single Scene or Two Scene Mode, the Submaster is created by the faders being
adjusted in either of theses modes, then switching into Submaster Mode to then record and play the
Submaster.
-Refer to the Record Function Section for details.
2. Submaster Pages
To change Submaster pages, hold down the SubMaster key. The LCD will show you the current
page. Use the Bump Buttons to select the desired page.
-Any recorded Submasters on each page will display red (half intensity) on the Bump Buttons
3. Assigning Fade Time for a SubMaster
3.1 Press the A Key to highlight the Assign Fade Function.
3.2 Hold down the Bump Button of the desired recorded Submaster and adjust the StepRate Fader
to modify the Fade Time.