user manual

Elation Professional® www.elationlighting.com - Trio-1248 - Page 26
TRIO-1248 OPERATION - ML MODE
6.2 Running a Chase
To run a chase, raise the fader of the playback to its top position. The chase will start to run.
-The HTP (intensity) channels in the chase will be controlled by the Fader. The other chan-
nels (LTP) will be set as soon as the fader moves above zero according to the LPT fader times
programmed in the chase. You can set the point at which the LPT channels activate from the
Fixture Library File.
-To stop a chase, pull the Fader back down to zero. The chase will stop and the user can
manually control the Chase Steps.
-When running the Playback, pressing the corresponding Bump will cause it’s indicator to turn
yellow.
-Pressing Step will cause the Chase to run Step by Step
-Pressing the corresponding Bump an additional time will erase the manual control
7. Pan/Tilt Invert
In Fixture Menu, the Pan/Tilt of a moving light may be changed between Normal and Invert.
Prior to setting the Pan/Tilt Invert, it is required to select an allocated Moving Light.
-Press the Bump button that you have allocated with a Moving Light.
-Press B to select “Pan/Tilt Invert”, the LCD shows the above figure.
-Press A to change between Pan Normal and Pan Invert.
-Press C to change between Tilt Normal and Tilt Invert.
-Press D to select Enter and confirm settings.
-Press Menu to return to the previous menu.
Once you complete the settings for Pan/Tilt Invert, push the Pan/Tilt fader up or down, the Moving
Light will react as you set it.
Fixture Menu
Pan
Normal
MENU
CLEAR
BUFFER
FX
DMX
BASE
A
B
C
D
Fade Time:24.0
Tilt
Normal
Enter
Set Current
Fix
Runway