user manual

Elation Professional® www.elationlighting.com - Trio-1248 - Page 34
TRIO-1248 MENU
4.7.1 Channel Set up:
Used to assign the DMX channels for each fixture type (Dimmer, LED and ML). The “Up”, “Down”,
and “>” are used to set related parameters.
-Press A to increase the value.
-Press B to decrease the value.
-Press C to move “>” (cursor) to next option.
-Press D “enter” to confirm and save set up.
-Press Menu to cancel or exit.
Note: The user has the options of allocating all 512 channels to whichever fixtures they desire. The
user must simply set all other values to 0 (Example: If the user wants to use all 512 channels for
Moving Lights, both the Dimmer and LED Start and End channel values must be set to 0).
4.7.2 DMX Patch
Used to softpatch Channel to DMX or DMX to channel. Default patch is 01 to 01, 02 to 02, etc...
1. Channel Patch
Channel to DMX patch option. Up to 9 channels can be patched to one fader. The same channel can
not be patched to more than one fader.
-Press A to increase the value.
-Press B to decrease the value.
-Press C to move “>” (cursor) to next option.
-Press D “enter” to confirm and save set up.
-Press Menu to cancel or exit.