user manual

Elation Professional® www.elationlighting.com - Trio-1248 - Page 41
TRIO-1248 MENU
In Menu Mode, press D key until you view “VGA Set” option. Press A key to select it. The LCD shows
you as below:
Press D key to select Enter. This will enable your VGA card and output to your monitor.
Press A key to Exit.
Note: The user is required to do the following preparation prior to enabling/using the VGA card.
1. Install your VGA card properly (please see the “Appendix” of this manual for the VGA card installa-
tion tips.)
2. Upload VGA images. (Please refer to the “Update VGA”.)
4.7.9 ArtNet Set:
The ArtNet Set option allows you configure the Trio for use with compatible Artnet devices.
1. OpPoll: Used to discover ArtNet devices connected to the Trios’ Artnet port.
2. View Device: Used to view ArtNet devices already discovered by the Trio.
3. ArtNet Config: Used to Enable/Disable Artnet, configure ArtNet Sub Switch and Universe for your
Trio.
Choose ArtNet Config, the LCD shows you:
1. Press A to set the Sub Switch.
2. Press B to set the Universe.
3. Press C to “Enable” Artnet.
4. Press D to “Disabled” Artnet.
Press Menu to Exit.
4.7.10 Upload LIB
The Upload LIB option allows you to upload your entire system fixture library or a single fixture from
the console to a USB drive.