user manual

Elation Professional® www.elationlighting.com - Trio-1248 - Page 44
TRIO-1248 MENU
If the user inputs an incorrect password in the process, the console will prompt you with “invalid
password”. The user will then be asked to provide the correct one. If you forget or misplace your
password, please contact our customer support department for assistance.
4.7.13 REV 1.21
Shows the current software version of your console is 1.21
4.8 VGA Card Installation Tips:
1. Save all data.
2. Disconnect the power from the rear of your console.
3. Remove the fasteners on the rear panel of the console.
4. Carefully insert the new VGA card and insure that is is installed correctly.
5. Re-install the fasteners.
6. Connect your monitor and reconnect the power supply to the console.
7. Turn on your system and select set up.
8. Once you have enabled your monitor, it will show the current state of your system. You may find
that the horizontal position of the display is slightly offset. Use the position control on your monitor
to re-position the display if needed. Adjust the video display brightness and contrast as needed to
obtain the best image.