user manual

Elation Professional® www.elationlighting.com - Trio-1248 - Page 47
TRIO-1248 CLEANING
6. Service
6.1 Maintenance
The Trio-1248 Lighting Console should require minimal maintenance over its operational life. The fol-
lowing basic maintenance practices will help keep the system performing well and looking good.
6.1.1 General Inspection
1. Inspect the system components on a regular basis. Check each button and indicator for proper
operation. Ensure data cables are securely connected. Check for dirt or moisture on all system sur-
faces.
2. Correct any external problems and test the system. If there are still indications that something is
not functioning correctly, contact Elation Customer Support. To prevent the risk of electrical shock,
do not open this unit. There are no user serviceable parts inside this unit.
6.1.2 Basic Cleaning
1. Wipe the external surfaces of system components on a regular basis using a dry cloth to prevent
dust accumulation. If necessary, slightly moisten the cloth with a mild soap and water solution.
Never use an abrasive cleaning solution on the exterior surfaces of the system components.
6.2 Troubleshooting
The Trio-1248 Lighting Console should perform well when properly operated and maintained, how-
ever, sometimes things just don’t work like they should. Table 5 contains symptoms, causes, and
resolutions for common faults.
Table 5
noituloseResuaCmotpmyS
No Power Bad power connection. Check power connection.
Reconnect plug if needed.
No receptacle power. Ensure receptacle has power.
Bad fuse. Check fuse. Replace if needed.
Erratic Fixture
Behavior
Improper DMX addressing. Check and correct DMX
addressing.
Improper DMX data cable. Verify proper DMX data cable.
Replace if needed.
No DMX termination. Properly terminate DMX data run.
No Control Bad data connection. Check all data cable connections.
Repair or reconnect as needed.
.evobarewoPoNeeS.rewopoN
Bad remote batteries. Replace remote batteries.
Improper DMX addressing. Check and correct DMX
addressing.