Specifications

Design LED 36MH™
©Elation Professional® 13
Design LED 36MH™
Clamp Mounting
The Design LED 36MH™ provides a unique mounting bracket assembly that integrates the
hanging yoke as well as the safety cable rigging point in one unit (see the illustration on next
page). When mounting this fixture to truss be sure to secure an appropriately rated clamp to
the hanging yoke using a M10 screw fitted through the center hole of the hanging yoke. As an
added safety measure be sure to attached at least one properly rated safety cable to the
fixture using on of the safety cable rigging point integrated in the bracket assembly
Securing the DESIGN LED 36MH™
Regardless of the rigging option you choose for your DESIGN LED 36MH™ always be sure
to secure your fixture with a safety cable. The fixture provides a built-in rigging point for a
safety cable on the hanging bracket as illustrated above (3). Be sure to only use the
designated rigging point for the safety.