Specifications

Design LED 36MH™
©Elation Professional® 20
Design LED 36MH™
ALON Runs fixture as a single unit for
Stand-Alone operation.
ALL ON/OFF Resets all motors and returns fixture
to the home position.
3 RESE
SCAN ON/OFF Resets only the pan and tilt motors.
LIFE 0000~9999 Displays the total fixture running time.
LAMP 0000~9999 Displays a lamps running time.
4 TIME
CLMP ON/OFF Clear lamp running time.
5 RPAN ON/OFF Reverses the pan movements.
6 RTLT ON/OFF Reverses the tilt movements.
7 FINE ON/OFF Changes modes between 16 bit and
8 bit operation.
VALU D–XX D-00 (DXXX) LED display will detail the DMX value
of each channel during normal
operation.
D ON ON/OFF Turns off LED display after 2 minutes
of non-use
8 DISP
FLIP ON/OFF This function will reverse the LED
display by 180˚ for hanging operation.
RDMX ON/OFF Allows a user to change the DMX
address remotely from a DMX
console.
SPOT ON/OFF Lamp optimization.
DFSE ON/OFF Resets all the fixture functions to
factory settings.
FEED ON/OFF Pan and tilt feedback (error
correction) on/off
9 SPEC
VER V1.0~V9.9 Displays the fixture’s current software
version
STEP
S–01 ~S–48
Sets the amount of steps in
the user program.
C–01
~
C-12
0 1 XX (00~FFH)
~
12 XX (00~FFH)
Edit each of the channel
settings (values) for the
selected scene.
TIME T – XX (01~FFH)
Adjust the hold time of
each scene in the user
program.
SCXX
CEDT
ON/OFF
Allows the programmer to
edit the user program via
any external DMX
controller.
10 EDIT
RUN ON/OFF Program test