Specifications

Design LED 36MH™
©Elation Professional® 40
Design LED 36MH™
12. CLEANING AND MAINTENANCE
Please refer to the following points during normal inspection:
1. Be sure all screws and fasteners are securely tightened at all times. Lose screws may
fall out during normal operation resulting in damage or injury as larger parts could fall.
2. There must not be any deformations on the housing, color lenses, rigging hardware
and rigging points (ceiling, suspension, trussing). Deformations in the housing could
allow for dust to enter into the motor assemblies. Damaged rigging points or
unsecured rigging could cause the unit to fall and serious injure a person.
3. All mechanical parts and motors should not show any traces of serious wear and
should rotate freely.
4. Electric power supply cables must not show any damage, material fatigue or
sediments. Never remove the ground prong from the power cable.
Further instructions depending on installation and usage have to be adhered to by a skilled
installer and any safety problems should be addressed before attempting operation.
We recommend frequent cleaning of the device; this will ensure operational longevity and
crisp light output. When cleaning, please use a moist, lint-free cloth. Never use alcohol or
solvents.
There are no user serviceable parts inside this. Please refer all other service related issues to
an authorized Elation service technician.
Should you decide to service the fixture yourself please order genuine Elation parts directly
from Elation.