User manual

!!!"#$%&'()$'*+&')*",(-.
! !!!!!7.............CUEPIX!BLINDER!WW2™!User!Manual!1.0
SAFETY INSTRUCTIONS - CONTINUED
• Always disconnect from main power source before performing any type of service and/or cleaning
procedure. Only handle the power cord by the plug end, never pull out the plug by tugging the wire
portion of the cord.
• Do not operate this fixture if the power cord has become frayed, crimped and/or damaged. If the power
cord is damaged, replace it immediately with a new one of similar power rating.
GENERAL GUIDELINES
• NEVER OPEN THIS FIXTURE WHILE IN USE!
• During the initial operation of this fixture, a light smoke or smell may emit from the interior of the fixture. This
is a normal process and is caused by excess paint in the interior of the casing burning off from the heat
associated with the lamp and will decrease gradually over time.
• This fixture is a professional lighting effect designed for use on stage, in nightclubs, theatres, etc. Do not
attempt installation and/or operation without proper knowledge of how to do so.
• Do not permit operation by persons who are not qualified for operating this type of theatrical fixture. Most
damages are the result of operations by nonprofessionals.
• If this fixture is exposed to extreme temperatures due to environmental changes, do not power the fixture
on until it has reached room temperature. Condensation could damage the fixture.
• Consistent operational breaks may ensure the fixture will function properly for many years to come.
• Do not shake fixture, avoid brute force when installing and/or operating the device.
• Always install the fixture with an appropriate safety cable. When installing the fixture in a suspended
environment, always use mounting hardware that is no less than M10 x 25 mm, also be sure the hardware
is insert in the pre-arranged screw holes in the base of the fixture.
• Please use the original packaging and materials to transport the fixture in for service.