PROFESSIONAL MOVING HEAD USER’S MANUAL DESIGN SPOT 575E KEEP THIS MANUAL FOR FUTURE NEEDS
For your own safety, please read this user manual carefully before installing the device. K eep thi s dev i ce aw ay f rom rai n and moi sture ! U npl ug mai ns l ead bef ore openi ng the housi ng. Every person involved with the installation, operation and maintenance of this device has to: -be qualified -follow carefully the instructions of this manual INTRODUCTION: Thank you for having chosen this professional moving head. You will see you have acquired a powerful and versatile device.
·Motorized linear zoom from 16° ~ 30° ·Linear dimmer in precise speed from 0~100% ·Stepless iris , 5%~100% linear change iris, pulse iris effect ·Stepless frost, 0%~100% linear change frost ·Preset variable iris, dimmer, shutter, frost pulse effects ·Strobe effect with 1-10 flashes per second or random strobe via shutter ·Friendly colored LCD display ·Battery buffered Control Board for operation time readouts etc ·Local and remote lamp on/off ·Preset program: 8 built in programs can be called up via DMX con
During initial start-up some smoke or smell may arise. This is a normal process and does not necessarily mean that the device is defective, it should decrease gradually. CA UTION Never touch the device during operation! The housing may heat up CA UTION Never look directly into the light source, as sensitive persons may suffer an epileptic shock. Please be aware that damages caused by manual modifications to the device are not subject to warranty. Keep away from children and non-professionals.
persons not qualified for operating the device. Most damages are the result of unprofessional operation. Please use the original packaging if the device is to be transported. For safety reasons, please be aware that all modifications on the device are forbidden. If this device will be operated in any way different to the one described in this manual, the product may suffer damages and the guarantee becomes void.
CA UTION Do not operate this device with open cover b) Mounting the device CA UTION Please consider the EN 60598-2-17 and the other respective national norms during the installation. The installation must only be carried out by a qualified person. The installation of the effect has to be built and constructed in a way that it can hold 10 times the weight for 1 hour without any harming deformation. The installation must always be secured with a secondary safety attachment, e.g. an appropriate safety cable.
installation can result in bodily injury. CA UTION The electric connection must only be carried out by a qualified electrician. Before mounting make sure that the installation area can hold a minimum point load of 10 times the device’s weight. Connect the fixture to the mains with the power plug installation via the Omega holders Screw one clamp each via a M12 screw and nut onto the Omega holders.
to the male 3-pin XLR input of the moving head. You can chain multiple Moving head together through serial linking. The cable needed should be two core, screened cable with XLR input and output connectors. Please refer to the diagram below.
You can set the same starting address for all fixtures or a group of fixtures, or make different address for each fixture individually. If you set the same address, all the units will start to “listen” to the same control signal from the same channel number. In other words, changing the settings of one channel will affect all the fixtures simultaneously. If you set a different address, each unit will start to “listen” to the channel number you have set, based on the quantity of control channels of the unit.
Personality Status Settings Fans Control Temperature C/F Edit Program Users Mode Set Effect Adjust Reset Function Initial Effect ON/OFF Auto/Music/Close/Hold ON/OFF ON/OFF ON/OFF 630/540 ON/OFF Speed 1~ 4 70%, 0~99% Address via DMX No DMX Status Pan Reverse Tilt Reverse Fine Resolution Pan Degree Feedback Movement Speed Mic Sensitivity Auto Fans Speed High Fans Speed Celsius Fahrenheit PAN PAN =XXX : : Add.
Function Mode DMX address setting With this function, you can adjust the desired DMX-address via the Control Board. • Select “Set DMX address“ via the encoder. • Press the encoder, adjust the DMX address by turning the encoder. • Press the encoder to confirm. • Press the Mode/Esc-button in order return to the main menu. Display the DMX 512 value of each channel With this function you can display the DMX 512 value of each channel. The display automatically shows the channel with a value changing.
Software version With this function , you can display the software version of the device. • Select “Software version” by turning the encoder. • Press the encoder, the display shows “V-X.X”, “X.X“ stands for the version number, e.g. “V-1.0”, “V-2.6”. • Turn the encoder in order to read the version of every individual IC. • Press the Mode/Esc-button in order to return to the main menu. LAMP CONTROL Lamp on/off With this function you can switch the lamp on or off via the Control Board.
1 to "7", channel 2 to "7" and channel 3 to "57". If you want to set the starting address to 420,set channel 1 to "7", channel 2 to "8" and channel 3 to "164" (256+164=420). • Wait for approx. 20 seconds and the unit will carry out a reset. After that, the new starting address is set. Run If No DMX With this function, when the drive is not DMX signal, it runs automatism. You can select model for close, hold, auto, music if no DMX. Default is hold.
Calibrate values With this function, you can calibrate and adjust the effect wheels to their correct positions. The password of calibrate values is 050. Users mode set User mode With this function, you can create user defined channel orders. Edit User mode With this function, you can adjust the preset user defined channel order. Edit program Select program With this function, you can select the program for the Program Run. Edit program With this function, you can edit the internal programs.
DMX channel (24 DMX channels): DESIGN SPOT 575E Channel 1 - PAN movement 8bit : Channel 2 – Pan fine 16bit Channel 3 - TILT movement 8bit : Channel 4– Tilt fine 16bit Channel 5 - Color Wheel : 0-13 14-27 Open / white Color 1 28-41 Color 2 42-55 Color 3 56-69 Color 4 70-83 Color 5 84-97 Color 6 98-111 Color 7 112-127 Color 8 128-187 Forwards rainbow effect from fast to slow 188-193 No rotation 194-255 Backwards rainbow effect from slow to fast Channel 6 - Cyan Color Wheel : 0-255 Cyan
40-49 Rot. gobo 4 50-59 Rot. gobo 5 60-69 Rot. gobo 6 70-89 Gobo 1 shake slow to fast 90-109 Gobo 2 shake slow to fast 110-129 Gobo 3 shake slow to fast 130-149 Gobo 4 shake slow to fast 150-169 Gobo 5 shake slow to fast 170-189 Gobo 6 shake slow to fast 190-255 Rot. gobo wheel cont.
Channel 13- 3 facet rotating prism, Prism / Gobo macros: 0-3 open 4-63 Forwards rotation from fast to slow 64-67 No rotation 68-127 Backwards rotation from slow to fast 128-135 Macro 1 136-143 Macro 2 144-151 Macro 3 152-159 Macro 4 160-167 Macro 5 168-175 Macro 6 176-183 Macro 7 184-191 Macro 8 192-199 Macro 9 200-207 Macro 10 208-215 Macro 11 216-223 Macro 12 224-231 Macro 13 232-239 Macro 14 240-247 Macro 15 248-255 Macro 16 Channel 14 – Focus: 0-255 Continuous ad
0-255 Intensity 0 to 100% Channel 18– Iris: 0-191 Max. diameter to Min.diameter 192-223 Pulse closing fast to slow 224-255 Pulse opening slow to fast Channel 19 –Frost: 0-191 Frost 0~100% 192-223 Pulse opening fast to slow 224-254 Pulse closing slow to fast 255 Max.
0-225 max to min speed 226-235 blackout by movement 236-245 blackout by all wheel changing 246-255 no function Channel 24– Lamp on/off, reset, internal programs: 0-19 colour change normal 20-39 colour change to any position 40-59 Lamp on 60-79 Lamp switch off 80-84 All motor reset 85-87 Scan motor reset 88-90 Colors motor reset 91-93 Gobo motor reset 94-96 Shutter & Dimmer motor reset 97-99 Other motor reset 100-119 Internal program 1 (secne1~8 of EEPROM) 120-139 Internal prog
ERROR MESSAGE When you turn on the fixture, it will make a reset first. The display may show “XXer” while there are problems with one or more channels. “XX” stands for channel PAN- movement, TILT- movement, Cyan Color, Magenta Color, Yellow Color, Color, Rotation gobo, Gobo Rotation, Prism Rotation, Shutter, Strobe, Focus, Stepless Zoom, Iris, Fire wheel who has the testing sensor for positioning. For example, when the display shows “Cyan color Er”, it means there is some error in channel 1.
(Rotating gobo wheel 2- error) This message will appear after the reset of the fixture if the yoke’s magnetic-indexing circuit malfunction (sensor failed or magnet missing) or the stepping-motor is defective ( or its driving IC on the main PCB). The Rotating gobo wheel 2 is not located in the default position after the reset.
2) The electric power supply cables must not show any damage, material fatigue or sediments. Further instructions depending on the installation spot and usage have to be adhered by a skilled installer and any safety problems have to be removed. CA UTION Disconnect from mains before starting maintenance operation. We recommend a frequent cleaning of the device. Please use a moist, lint- free cloth. Never use alcohol or solvents. There are no serviceable parts inside the device except for the lamp.
