Operating instructions

Operating Modes: The ELED Par RGB Zoom has nine modes of operation
with zoom control:
• Static Mode - Choose one of 32 colors to remain static.
• RGB Mode - Adjust the intesity of each RGB color.
• Three Color Change mode - In this mode the unit will scroll through RGB
colors. The speed of the scroll is adjustable.
• Seven Color Change mode - In this mode the unit will scroll through the
seven available colors. The speed of the scroll is adjustable.
• Three Color Fade mode - In this mode the unit will fade through RGB
colors. The speed of the fade is adjustable.
• Seven Color Fade mode - In this mode the unit will fade through the
seven available colors. The speed of the fade is adjustable.
• Auto Mode - In this mode the scroll mode and fade mode will both run.
The amount of program cycles can be adjusted and set.
• Sound-Active mode - The unit will react to sound, chasing through the
available colors.
• DMX control mode - This function will allow you to control each individual
fixtures traits with a standard DMX 512 controller such as the Elation®
Show Designer™.
Zoom Adjustment:
With this feature you can adjust the wash output. The output is adjustable
between 10˚ - 60˚.
1. Plug the fixture in and press the MODE button for at least 3 seconds,
until “O.T.O.r.” is displayed.
2. After “O.T.O.r.” is displayed the unit will display “C.X.X.X.”. Press the UP
or DOWN buttons to adjust the wash output (zoom). The zoom can be
adjusted between 000-190.
3. To exit this setting, press the MODE button for at least 3 seconds.
Master-Slave Operation:
This function will allows you to link units together to run in a Master-Slave
mode. In Master-Slave operation one unit will act as the controlling unit and
the others will react to the controlling units built-in programs. Any unit can
act as a Master or as a Slave however, only one unit can be programmed to
act as the “Master.”
Master-Slave Connections and Settings:
1. Daisy chain your units via the XLR connector on the rear of the unit. Use
standard XLR microphone cables to link your units together. Remember
that the Male XLR connector is the input and the Female XLR connec-
tor is the ouput. The first unit in the chain (master) will use the female
XLR connector only. The last unit in the chain will use the male XLR con-
ELED Par RGB Zoom Operating Instructions
Elation Professional - www.elationlighting.com - ELED Par RGB Zoom - Page 8
Elation Professional - www.elationlighting.com - ELED Par RGB Zoom - Page 7
nector only.
2. Set the “Master” unit to your desired operating mode.
3. For the “Slave” unit(s), press the UP or DOWN buttons until “SLAv.” is
displayed.
4. Connect the “Slave” unit or units and they will automatically start to fol-
low the “Master.”
Auto Mode:
1. Plug the fixture in and press the MODE button until “AUTO” is displayed.
The unit will now run its auto program.
2. Press the SET UP button and the display will show n.xxx. Press the UP
or DOWN button to adjust the amount of program cycles.
Sound Active Mode:
1. Plug the fixture in and press the MODE button until “SU.XX” is displayed.
2. Use the UP or DOWN buttons to adjust the sound sensitivity. “00” being
the least sensitive, “31” the most sensitive.
3. The fixture will now change via sound.
Static Mode:
1. Plug the fixture in and press the MODE button until “CL.XX” is displayed.
2. There are 32 color to choose from. Select your desired color by pressing
the UP and DOWN buttons.
RGB Mode:
1. Plug the fixture in and press the MODE button until “r.XXX” is displayed.
You are now in RGB mode. Press the SET UP button to scroll through
the RGB mode. “r.XXX” is red, “G.XXX” is green, and “b.XXX” is blue.
2. Adjust the intensity of each individual color by pressing the UP and
DOWN buttons.
Three Color Change Mode: Note:
1. Plug the fixture in and press the MODE button until “JPXX” is displayed.
2. Use the UP or DOWN buttons to adjust the scroll speed.
Seven Color Change Mode: Note:
1. Plug the fixture in and press the MODE button until “JPXX” is displayed.
Press the SET UP button, and “JP.XX” will be displayed. Notice the
period between the letters and numbers, this lets you know you are in
Seven Color Change Mode.
2. Use the UP or DOWN buttons to adjust the scroll speed.
Three Color Fade Mode: Note:
1. Plug the fixture in and press the MODE button until “FdXX” is displayed.
2. Use the UP or DOWN buttons to adjust the fade speed.
ELED Par RGB Zoom Operating Instructions