Specifications

DLED Par Zoom™
©Elation Professional, Los Angeles Ca. 30 www.ElationLighting.com
12. WORKING WITH BUILT-IN PROGRAMS
The fixture comes equipped with a built-in DMX recorder that allows custom programs to be
installed and recalled directly from the fixture’s control board. Programs can be created and
stored using the fixture’s control board or by using an external DMX controller. The following
instructions will detail the procedures for using the on-board system menu as well as using a
DMX compliant controller.
- Main menu 4
1. Press [MODE/ESC] to enter the main menu
(display flashing).
2. Press [UP] or [DOWN] button to select “EDIT”.
- Define the number of steps in Run
With this function you can define the number of
steps in the Program Run.
1. Select “STEP” by pressing [UP] or [DOWN]
button.
2. Press [ENTER], the display shows “S-XX”, “X”
stands for the total amount of steps you want to
save, so you can call up to 48 scenes in “RUN”. For
example if the “XX” is 05, it means that “RUN” will
run the first 5 scenes you saved in “EDIT”.
3. Press [ENTER] to confirm or Press [MODE/ESC]
to return to the main menu.
-Auto Save
With this function you can automatic save the number of steps in the Program Run.
1. Select “REC” by pressing [UP] or [DOWN] button.
2. Press [ENTER], the display shows “RE.XX”, “XX” stands for the number from 1 to 400.