Instruction manual

ManualsBrandsElation ManualsConsumer electronicsELED QA Strip

User Instructions

ELED QA Strip Introduction

Elation Professional - www.elationlighting.com - ELED QA Strip Instruction Manual Page 2

12/12

Unpacking: Thank you for purchasing the ELED QA Strip by Elation

Professional®. Every ELED QA Strip has been thoroughly tested and

has been shipped in perfect operating condition. Carefully check the

shipping carton for damage that may have occurred during shipping.

If the carton appears to be damaged, carefully inspect your xture

for any damage and be sure all accessories necessary to operate the

unit has arrived intact. In the case damage has been found or parts

are missing, please contact our customer support number for further

instructions. Do not return this unit to your dealer without rst contact-

ing customer support.

Introduction: The ELED QA Strip is part of Elation Professionals®

continuing pursuit for creating high quality affordable intelligent fix-

tures. The ELED QA Strip is a powerful DMX intelligent 4-in-1 RGBA

(Red, Green, Blue, & Amber) LED strip. This unit can has 4 operat-

ing modes; Macro mode, Program mode, RGBA mode, and DMX con-

trolled. This unit can be used as a single, stand alone unit or used in a

master-slave configuration.

Customer Support: ©Elation® provides a customer support line, to

provide set up help and to answer any question should you encounter

problems during your set up or initial operation. You may also visit us

on the web at www.elationlighting.com for any comments or sugges-

tions. Service Hours are Monday through Friday 8:00 a.m. to 4:30 p.m.

Pacic Standard Time.

Voice: (323) 582-3322

Fax: (323) 832-9142

E-mail: support@elationlighting.com

Warning! To prevent or reduce the risk of electrical shock or re, do

not expose this unit to rain or moisture.

Caution! There are no user serviceable parts inside this unit. Do not

attempt any repairs yourself, doing so will void your manufactures war-

ranty. In the unlikely event your unit may require service please contact

PLEASE recycle the shipping carton when ever possible.

ELED QA Strip

Summary of content (12 pages)

PAGE 1
ELED QA Strip Introduction Unpacking: Thank you for purchasing the ELED QA Strip by Elation ELED QA Strip Professional®. Every ELED QA Strip has been thoroughly tested and has been shipped in perfect operating condition. Carefully check the shipping carton for damage that may have occurred during shipping. If the carton appears to be damaged, carefully inspect your fixture for any damage and be sure all accessories necessary to operate the unit has arrived intact.
PAGE 2
ELED QA Strip General Instructions To optimize the performance of this product, please read these operating instructions carefully to familiarize yourself with the basic operations of this unit. These instructions contain important safety information regarding the use and maintenance of this unit. Please keep this manual with the unit, for future reference.
PAGE 3
SOUND REMOTE CONTROL INPUT INPUT OUTPUT ELED QA Strip Set Up Power Supply: The Elation ELED QA Strip contains an automatic voltage switch, which will auto sense the voltage when it is plugged into the power source. With this switch there is no need to worry about the correct power voltage, this unit can be plugged in anywhere. DMX512 POWER DMX+,DMX-,COMMON DMX-512: DMX is short for Digital Multiplex.
PAGE 4
ELED QA Strip Operating Instructions LED Display Backlight On/Off: To set the LED display to turn off after 10 seconds, press the MODE button until “Disperm BackLight” is displayed. Either “On” or “Off” will be displayed. Press the UP or DOWN button so that “Off” is displayed, the display will now turn off after 10secs. Press any button for at least 5secs. to turn the display on again. Be advised though that the display will turn off automatically after 10 seconds of inactivity.
PAGE 5
ELED QA Strip Operating Instructions mode, 54 Channel mode, and a 72 Channel mode. See pages 11-16 for each modes’ DMX traits. 1. This function will allow you to control each individual fixture’s traits with a standard DMX 512 controller such as the Elation® Show Designer™ or the Elation® DMX Operator™. 2. To run your fixture in DMX mode, plug in the fixture via the XLR connections to any standard DMX controller.
PAGE 6
ELED QA Strip Channel 1 Value 0 - 255 ELED QA Strip Channel Value 1 0 - 255 2 0 - 255 ELED QA Strip Channel 1 2 3 4 1 Channel Mode Function COLOR MACROS PLEASE SEE COLOR MACRO CHART ON PAGE 17 2 Channel Mode Function COLOR MACROS PLEASE SEE COLOR MACRO CHART ON PAGE 17 MASTER DIMMER 0% - 100% 4 Channel Mode ELED QA Strip Channel 1 2 3 4 5 Value Function 0 - 255 RED 0% - 100% 0 - 255 GREEN 0% - 100% 0 - 255 BLUE 0% - 100% 2 0 - 255 AMBER 0% - 100% 3 Value Function
PAGE 7
ELED QA Strip Channel 1 2 3 4 5 6 Value 0 - 255 0 - 255 0 - 255 0 - 255 0 - 255 8 Channel Mode Function RED 0% - 100% GREEN 0% - 100% BLUE 0% - 100% AMBER 0% - 100% COLOR MACROS PLEASE SEE COLOR MACRO CHART ON PAGE 17 STROBING/PROGRAM SPEED 0 - 15 NOTHING 16 - 255 STROBING SLOW - FAST 1 - 255 PROGRAM SPEED SLOW - FAST 7 MODE 0 - 127 OFF 128 - 159 AUTO MIX 160 - 191 3 COLOR JUMP 192 - 223 7 COLOR JUMP 224 - 255 SOUND ACTIVE 8 MASTER DIMMER 0 - 255 0% - 100% Channel 1, 2, 3, & 4 will not work, when
PAGE 8
ELED QA Strip Channel 1 2 3 4 5 6 7 8 Value 0 - 255 0 - 255 0 - 255 0 - 255 0 - 255 0 - 255 0 - 255 0 - 255 54 Channel Mode Function RED (LED 1) 0% - 100% GREEN (LED 1) 0% - 100% BLUE (LED 1) 0% - 100% RED (LED 2) 0% - 100% GREEN (LED 2) 0% - 100% BLUE (LED 2) 0% - 100% RED (LED 3) 0% - 100% GREEN (LED 3) 0% - 100% *CHANNELS 9-46 THE SAME RGBA LED PATTERN CONTINUES* *THE DIRECTION IN WHICH THE PIXELS LIGHT UP CAN BE SWITCHED USING THE DIRECTION SET FEATURE ON PAGE 8* 47 48 49 50 51 52 53 54 0 - 2
PAGE 9
ELED QA Strip Color Macro Chart DMX R G B A Black 0 0 0 0 0 DMX R G B Macro mode1 1-4 80 255 234 80 Macro mode33 129-132 255 206 143 0 Macro mode2 5-8 80 255 164 80 Macro mode34 133-136 254 177 153 0 Macro mode3 9-12 77 255 112 77 Macro mode35 137-140 254 192 138 0 Macro mode4 13-16 117 255 83 83 Macro mode36 141-144 254 165 98 0 Macro mode5 17-20 160 255 77 77 Macro mode37 145-148 254 121 0 0 Macro mode6 21-24 223 255 83 83
PAGE 10
ELED QA Strip Power Cord Daisy Chain With this feature you can connect the fixtures to one another using the powercon input and output sockets. The quantity that can be connected is 6 fixtures maximum. After 6 fixtures you will need to use a new power outlet. They must be the same fixtures. DO NOT mix fixtures. ELED QA Strip Fuse Replacement First unplug the power. The fuse holder is located next to the power inlets. Using a flat-head screw driver unscrew the fuse holder.
PAGE 11
ELED QA Strip Notes Elation Professional - www.elationlighting.com - ELED QA Strip Instruction Manual Page 21 ELED QA Strip Notes Elation Professional - www.elationlighting.
PAGE 12
ELED QA Strip Specifications Model: ELED QA Strip SPECIFICATIONS: Working Position: Any safe working position Voltage*: 100V ~ 240V/47~63Hz LED’s: 18 x 5 Watt Quad RGBA LED’s Power Consumption: 150W Power Cord Daisy Chain:6 Fixtures Max. Fuse: 3.15 Amp Beam Angle: 20+50 Degrees Weight: 21 lbs./ 9.5 kgs. Dimensions: 40.25” (L) x 8.