User manual

11. DMX TRAITS

DMX Operation Notes:

The fixture will function in DMX mode whenever the unit is receiving a DMX signal. Please

note that this will override all manual settings.

This unit will keep and retain the last DMX command in the event of DMX signal failure. To

reset the fixture you must turn the power off.

DMX CHANNEL TRAITS

The charts below and on the preceding pages outline the different DMX traits for the five

different DMX modes.

5-Channel mode: In this mode channel one controls all the red LEDs, channel two controls

all the green LEDs, channels three controls all the blue LEDs, channel four controls all the

white LEDs, and channel five controls all the amber LEDs.

DLED STRIP RGBAW ™