User manual

13. User manual of RF controller

BLACK OUT ：The lamp will be turned off after press

the button and exit to the status of Address Display.

AUTO RUN：Press this button to enter the built- in

program

SOUND ACTIVE：Press this button to enter the

sound active (Please notice that it works only if the lighting

fixture has this sound active function)

SPEED： After pressing PROG button, press this

button and then you can adjust the speed of programme by

pressing “+” or “ –“.

ALON/MAST：Press this button to change the status

of Along and Mast.

SET ADDR：SET ADDR/DMX MODE. Press this

button to change Address. Address can be changed by

pressing number key or “+” or “ –“ . Then perss ENTER to

conserve this address. Meanwhlie, after pressing this button,

you can change DMX mode, RED=MODE 1, GREEN =

MODE 2, BLUE= MODE 3, AMBER= MODE 4 , WHITE = MODE 5, by pressing button

A,G,B,W,A. (the number of DMX mode depends on the lighting fixture ) Then press ENTER

to conserve the present mode.

ENTER：Confirm key.

R：Press this button to get the full brightness of red color and enter the status of

adjustment. Press number+ENTER to dim red color.Press again, the red color will die

out.

G：Press this button to the full brightness of green color and enter the status of

adjustment.,.Press number+ENTER to dim the green color. Press again, the green color will

die out.

DLED STRIP RGBAW ™