Instruction Manual from software version: 1.18/18/12/10/n (Instruction version: 1.0) e-mail: service@glp.de Internet: http://www.glp.
Notes: GLP German Light Products GmbH (Instruction version: 1.0) / from software version: 1.
Table of contents 1 Description of Device ............................................................................................. 4 1.1 Safety Instructions............................................................................................ 5 2 Preparation and Installation .................................................................................. 6 2.1 Safety information ............................................................................................ 6 2.2 Mounting ......
1 Description of Device 1 1. Moving head (actively and passively cooled) 2. Arm with various cooling vents 2 3. LCD-Display/Menu (data entry) 3 4. Base with various connectors and Camlock mounting system 4 b a se s id e 1 5. Power On/Off 6. DMX- Output (3 pole) 7. DMX- Input (3 pole) 5 8. Micro-fuse 5x20mm, T5A 6 9. Mains supply (Powercon) ba se s id e 2 10. 2x Safety eyes FUSE T4A 10 GLP 7 8 9 German Light Products GmbH 10 (Instruction version: 1.0) / from software version: 1.
1.1 Safety Instructions The IMPRESSION X4 is a High-Tech Product. To guarantee a smooth operation, it is necessary to respect the following rules. The manufacturer of this device will not take responsibility for damages through any disregard of the information provided in this manual. Warranty claims also will be voided in the case that the fixture housing is opened. 1. Before powering on the fixture, make sure that the fixtures fans and air inlets are clean and not blocked. 2.
2 Preparation and Installation 2.1 Safety information The IMPRESSION X4 fixtures from GLP is fitted with a number of plano-convex lenses in a highly efficient collimator cluster. This type of lens can act as a strong magnifying glass. If the rays from a strong light source (such as the sun or another lighting fixture) are directed towards the front of any of these fixtures, then internal damage may occur.
2.2 Mounting The IMPRESSION X4 is fully operational whether it hangs or is mounted to the wall. It can also be operated while standing on the floor. Keep a safety distance of min. 0.5 m towards any easily inflammable materials (decoration etc.). Pay attention to the regulations of: BGV C1 (former VBG 70) and DIN VDE 0711-217. The installation shall be done by qualified staff only.
2.2.1 Mounting on the Floor (Upright) To operate the IMPRESSION X4 in an upright position, please use the dedicated tri-legged floor stand supplied with your fixture. It is fixed to the base of the fixture with fasteners called Camlock quick-release connectors. Insert the two fasteners and turn each 90° to lock them. Do the opposite to release them again. On both sides you'll find eyelets to pull though a fixing strap. This allows for additional bracing of the fixture. 2x Camlock 2x Eyelets 2.2.
2.2.3 Mounting in sideways Position To operate the IMPRESSION X4 in a sideways position please use an additional mounting bar. This is fixed by two Camlock quick-release connectors. Two half-couplers (clamps) are used to mount the bar to a standard truss bar. This technique is necessary to cope with the torque which accrues in this mounting position. In addition it allows a repositioning of the couplers to fit between two truss chords.
2.4 Connections 2.4.1 Power Supply ~100-240 Volt AC, 50-60 Hz, earth contact type plug - Powercon Connected load 350 VA (W) <=> T5A (micro-fuse 5x20mm) Please see printing on the case for the right electronic supply! Disconnect from the mains supply for changing the fuse and use only the above described micro-fuse type. 2.4.2 DMX USITT DMX-512 Standard input/output in 5 pin connectors. Pin 1 = [Ground] / Pin 2 = [-] / Pin 3 = [+] / Pin 4&5 N.C. The DMX- Addressing starts at the DMX- Address [001].
Pan/Tilt Movements Manual control for Pan/Tilt movements Special White Temperature Manual control for Color temperature Dimmer Manual control for Dimmer Shutter Manual control for Shutter White Manual control for White Blue Manual control for blue Green Manual control for green Red Manual control for red Color Wheel Manual control for the color wheel Tilt Manual control for Tilt (Y-movement) Key code xxxx Display Contrast PWM Frequ. Adj.
DOWN - UP Pattern Instantaneous value for Pattern channel / bank Zoom Instantaneous value for Zoom Speed Movements Pan/Tilt Movements Speed adjustment for Pan/Tilt movements see item below Instantaneous value for Pan/Tilt movements Special Instantaneous value for Special White Temperature Adjustment of the color temperature for WHITE Dimmer Instantaneous value for Dimmer Shutter Instantaneous value for Shutter White Instantaneous value for White Blue Instantaneous value for Blue Green
4 DMX Channel Selection (DMX Protocol) Normal-Mode 20 DMX channels Channel Function 1) PANcoarse 2) PAN-fine 3) Tiltcoarse 4) Tilt-fine 5) Color (fixed) 6) Red 7) Green 8) Blue 9) White 10) Shutter 11) Dimmer 12) CTO 13) Special 14) Movement GLP DMX HEX % 0 .. 660° 0..255 00..FF 0..100 High- Pos ... High- Pos + 2.6° (16 Bit) 0 .. 300° 0..255 0..255 00..FF 00..FF 0..100 0..100 High- Pos … High- Pos + 1.
Channel macros 15) Speed Pan/Tilt 16) Zoom 17) Pattern 18) Pattern Byte 1 19) Pattern Byte 2 20) Pattern Byte 3 Function PAN Time and Value 1 1 1 1 2 2 2 2 3 3 3 3 4 4 4 4 0° 90° 180° 270° PAN 0° 90° 180° 270° PAN 0° 90° 180° 270° PAN 0° 90° 180° 270° TILT size / phase see PAN PAN / TILT size / phase see PAN PAN / TILT (inverse) size / phase see PAN Circle size / phase see PAN Circle (inverse) size / phase see PAN Lying eight size / phase see PAN Random movement size / phase see PAN Pan/Tilt movement
Channel (fixed) Function Time and Value Color 01 - Red 1) 1) Color 02 - Amber 1) Color 03 - Warm Yellow 1) Color 04 - Yellow 1) Color 05 - Green 1) Color 06 - Turquoise 1) Color 07 - Cyan 1) Color 08 - Blue 1) Color 09 - Lavender 1) Color 10 - Mauve 1) Color 11 - Magenta 1) Color 12 - Pink White - CTO White - CTB 11) Dimmer 12) Zoom 13) Special 14) Pattern GLP Rainbow Effect Stop 2) Rainbow Effect 3) Rainbow Effect, random colors Color mixing system - Red Color mixing system - Green Color mixing sys
High Resolution (Extended) -Mode 21 DMX Channels Channel Function 1) PANcoarse 2) PAN-fine 3) Tiltcoarse 4) Tilt-fine 5) Redcoarse 6) Redfine 7) Greencoarse 8) Greenfine 9) Bluecoarse 10) Bluefine 11) Whitecoarse 12) Whitefine 13) Shutter Time and Value DMX HEX % 0 .. 660° 0..255 00..FF 0..100 High- Pos ... High- Pos + 2.6° (16 Bit) 0 .. 300° 0..255 0..255 00..FF 00..FF 0..100 0..100 0..255 0..255 00..FF 00..FF 0..100 0..100 0..255 00..FF 0..100 0..255 00..FF 0..100 0..255 00..
Channel Function 21) Pattern Byte 3 Direct access to Pattern of LED 17..19 1) Time and Value DMX HEX % 0..07 00…07 0..2.5 The predefined colors can be used as start-colors for the Rainbow effect. Please select first a desired start-color before you activate the rainbow effect. All IMPRESSION X4 will then start from that color and will execute the rainbow effect synchronously. Different IMPRESSION X4 can have different start-colors but will still execute the rainbow effect synchronously.
5 Maintaining and Cleaning the IMPRESSION X4 The IMPRESSION X4 is a fixture of very low maintenance. It is only necessary to clean the air inlets and outlets as well as the optical LED lenses from time to time. For safe operation it is absolutely essential that the fixture is kept clean and that dust, dirt and smoke-fluid residues must not build up on, or within the fixture. Otherwise the fixture's light-output will be significantly reduced or damages can occur.
6 Technical Specifications Power supply Power consumption 350 VA (Watt) Power Input ~100-240 V AC, 50-60 Hz (wide range input) Fuse protection Micro-fuse 5x20 mm, T5A Operational Parameters Max.
7 Dimensions 341 297 350 375 189 235 338,28 310° 270° 270° 90 PAN movement range: 540° GLP German Light Products GmbH (Instruction version: 1.0) / from software version: 1.
8 Index beam-lights.................................................. 6 BGV C1 ........................................................ 7 Mounting in hanging Position......................... 8 Mounting in sidewise Position........................ 9 Mounting on the Floor ................................... 8 C N Camlock........................................................ 8 Cleaning...................................................... 18 Compress-Mode ........................................
9 Appendix A Patterns are grouped into two sets which can be activated and selected via the DMX channel "Special". Choose the desired pattern by its corresponding DMX value on channel "Pattern". Orientation: Patterns are shown when looking at the front of a standing fixture; Head faced in direction of fixtures front label: DMX Pan @ 128; Tilt @ 220; Zoom @ 255 (letters are displayed homogenous).
DMX Pattern DMX Pattern DMX Pattern DMX 052 069 086 103 053 070 087 104 054 071 088 105 055 072 089 106 056 073 090 107 057 074 091 108 058 075 092 109 059 076 093 110 060 077 094 111 061 078 095 112 062 079 096 113 063 080 097 114 064 081 098 115 065 082 099 116 066 083 100 117 067 084 101 118 068 085 102 119 GLP German Light Products GmbH (Instruction version: 1.0) / from software version: 1.
DMX Pattern DMX Pattern DMX Pattern DMX 120 137 154 171 121 138 155 172 122 139 156 173 123 140 157 174 124 141 158 175 125 142 159 176 126 143 160 177 127 144 161 178 128 145 162 179 129 146 163 180 130 147 164 181 131 148 165 182 132 149 166 183 133 150 167 184 134 151 168 185 135 152 169 186 136 153 170 187 GLP German Light Products GmbH (Instruction version: 1.0) / from software version: 1.
DMX Pattern DMX Pattern DMX Pattern DMX 188 205 222 239 189 206 223 240 190 207 224 241 191 208 225 242 192 209 226 243 193 210 227 244 194 211 228 245 195 212 229 246 196 213 230 247 197 214 231 248 198 215 232 249 199 216 233 250 200 217 234 251 201 218 235 252 202 219 236 203 220 237 204 221 238 GLP German Light Products GmbH Pattern 253 reserved 254 reserved 255 reserved (Instruction version: 1.
Patterns Set 2 DMX Pattern DMX Pattern DMX Pattern DMX 000 017 034 051 001 018 035 052 002 019 036 053 003 020 037 054 004 021 038 055 005 022 039 056 006 023 040 057 007 024 041 058 008 025 042 009 026 043 010 027 044 011 028 045 012 029 046 013 030 047 014 031 048 015 032 049 016 033 050 GLP German Light Products GmbH 059 (Instruction version: 1.0) / from software version: 1.
GLP German Light Products GmbH (Instruction version: 1.0) / from software version: 1.
