System information

FMA Direct 15 Co-Pilot II reference manual
Quick Setup
Press ENTER to
Erase Old Setup
Select Aircraft?
>Airplane
Front Facing
Diag. Sensor? >2&3
Sensor Label is
facing? >Sky
Specify front-facing IR detector(s) on Main Sensor, then press ENTER.
ENTER/BACK
ENTER/BACK ENTER/BACK
ENTER/BACK
INC/DEC
INC/DEC
Co-Pilot II
Main Menu
CHOOSE TASK? >QUICK SETUP
INC/DEC
INC/DEC
“Preferences”
(Main Menu)
Select aircraft type, then press ENTER.
ENTER/BACK
ENTER/BACK
Sensor Label is
facing? >Ground
INC/DEC
Specify Main Sensor label orientation, then press ENTER.
Select Aircraft?
>Helicopter >VTOLxxxxxx
Front Facing
Sensor? >4
xxxxxx >3&4
xxxxxxxx>1
xxxxxx >1&4
xxxxxxxx>2
xxxxxx >1&2
>3
Use 3D Flight
Modes? >N
Use 3D Flight
Modes? >Y
INC/DEC
Enter 3D Setup
Password? > 0
See text for password. Hold INC or DEC to fast scroll, then press ENTER.
ENTER/BACK
3D password
correct?
ENTER/BACK
3D Flight Modes
can now be used
ENTER
ENTER/
BACK
ENTER/BACK
No
Yes
Back
Center Ail/Elv
& Press ENTER
Move Elev Stick Slowly BACK 0%
Elevator SAVED
Center the Stick
Center Aileron and
Elevator sticks on TX, then
press ENTER.
Pull back Elevator stick on
TX. Programmer screen
must show >98%.
ENTER ENTER
Move Aileron stick on TX to
left. Programmer screen
must show >98%.
BACK
BACK
Move Aileron Stk
Slowly <LEFT 0%
Return Elevator stick on TX
to neutral, then press
ENTER.
Return Aileron stick on TX
to neutral, then press
ENTER.
ENTER
Aileron SAVED
Center the Stick
Sensor Setup
COMPLETE
Center Rudder
& Press ENTER
Move Rudder Stk
Slowly <LEFT 0%
Rudder SAVED
Center the Stick
Center Rudder stick on TX,
then press ENTER.
Move Rudder stick on TX
slowly left. Programmer
screen must show >98%.
ENTER ENTER
BACK
BACK
Rudder Setup
COMPLETE
Return Rudder stick on TX
to neutral, then press
ENTER.
ENTER
Flight Mode
Setup? >N
Rudder Setup?
>N
Rudder Setup?
>Y
ENTER
INC/DEC
BACK
Sensor Setup?
>N
ENTER
BACK
Sensor Setup?
>Y
INC/DEC
Flight Mode
Setup? >Y
ENTER
INC/DEC
“Flight Mode Setup”
3D password
accepted?
ENTER/BACK
No
Yes
ENTER
ENTER
BACK
ENTER/BACK
ENTER
“Preflight” (or “Do Field Calib.” in “Link Up” flowchart, if Vertical Sensor Module not detected) (Main Menu)
Quick Setup