Platinum Spot LED Pro Elation Professional 6122 S Eastern Ave Los Angeles, Ca 90040 www.elationlighting.com 9/26/2012 - visage Version 1.
Platinum Platinum Spot Spot LED LED Pro™ Pro™ ©Elation Professional, Los Angeles Ca. 2 www.ElationLighting.
Platinum Spot LED™ CONTENTS 1. General Information……………………………………………………………………… 4 a. Introduction………………………………………………………………………. 4 b. Unpacking………………………………………………………..…………..….. 4 c. Customer Support…………………………………………….………………… 4 d. Warranty Registration……………………………………………………..……. 5 e. Discharge Lamp Warning………………………………………………………. 5 2. Safety Instructions………………………………………………………........…………. 7 3. Features…………………………………………………………………………………… 9 4. General Guidelines………………………………………………………………………. 10 5.
Platinum Platinum Spot Spot LED LED Pro™ Pro™ 1. GENERAL INFORMATION INTRODUCTION: Congratulations, you have just purchased one of the most innovative and reliable lighting fixtures on the market today! The Platinum Spot LED PRO™ has been designed to perform reliably for years when the guidelines in this booklet are followed.
Platinum Spot LED™ Please do not discard the shipping carton in the trash. Please recycle whenever possible. WARRANTY REGISTRATION: The Platinum Spot LED Pro™ carries a two-year (730 days) limited warranty. Please fill out the enclosed warranty card to validate your purchase. All returned service items whether under warranty or not, must be freight pre-paid and accompany a return authorization (R.A.) number. The R.A. number must be clearly written on the outside of the return package.
Platinum Platinum Spot Spot LED LED Pro™ Pro™ procedure. Only handle the power cord by the plug. Never pull out the plug by tugging the wire portion of the cord. This fixture is designed for use indoors. Use of this fixture outdoors will void the manufactures warranty. Please be aware that damages caused by manual modifications to the device are not subject to warranty. ©Elation Professional, Los Angeles Ca. 6 www.ElationLighting.
Platinum Spot LED™ 2. SAFETY INSTRUCTIONS The Platinum Spot LED Pro™ is an extremely sophisticated piece of electronic equipment. To guarantee a smooth operation, it is important to follow the guidelines in this manual. Elation will not accept responsibility for damages resulting from the misuse of this fixture due to the disregard of the information printed in this manual. 1. Always be sure that the fan and the air inlets remain clean and are never blocked.
Platinum Platinum Spot Spot LED LED Pro™ Pro™ 3.
Platinum Spot LED™ 4. GENERAL GUIDELINES This fixture is a professional lighting effect designed for use on stage, in nightclubs, in theatres, etc. Do not attempt operation or installation without a proper knowledge on how to do so. This fixture was designed for indoor use only. Consistent operational breaks may ensure that the fixture will function properly for many years to come. Do not shake the fixture around. Avoid brute force when installing or operating the device.
Platinum Platinum Spot Spot LED LED Pro™ Pro™ 5. FIXTURE OVERVIEW 1: Lens 2: Display 3. Wireless DMX Indicator 4: DC Switch 5: Microphone 6: Left Button 7: Down Button 8: Right Button 9: Mode/Esc Button 10: Up Button 11: Wireless DMX Antenna 12: Enter Button 13: Handle 14: 5-Pin DMX in 15: 5-Pin DMX out 16: 3-Pin DMX in 17: 3-Pin DMX out 18: Power Switch 19: Fuse 20: Power Input ©Elation Professional, Los Angeles Ca. 10 www.ElationLighting.
Platinum Spot LED™ 1. Lens – Main output lens. 2. LED Menu Display – Full color animated menu display. 3. Wireless DMX Indicator - This two-color indicator is used to visual the current status of the wireless DMX mode. Red indicates wireless DMX mode is off, green indicated wireless DMX is active. Flashing red and green indicated wireless mode is active but the unit is not received a wireless signal. 4. DC Switch - Controls menu and display power when the unit is disconnected from main power. 5.
Platinum Platinum Spot Spot LED LED Pro™ Pro™ 12. Enter Button – The enter button is used to enter in to a certain menu function or to lock a function into memory. 13. Carrying Handle – Please use this intergraded handled to move the fixture form location to location. Never carry the fixture by the head. 12. Lamp Access Panel – This panel provides access to the lamp and lamp socket assembly. Always allow ample time for the lamp to cool before attempting access to the lamp and lamp socket. 14.
Platinum Spot LED™ 6. MOUNTING AND INSTALLATION Cautions: For added protection mount the fixtures in areas outside walking paths, seating areas, or in areas were the fixture might be reached by unauthorized personal. Before mounting the fixture to any surface, make sure that the installation area can hold a minimum point load of 10 times the device’s weight. Fixture installation must always be secured with a secondary safety attachment, such as an appropriate safety cable.
Platinum Platinum Spot Spot LED LED Pro™ Pro™ Mounting points Overhead mounting requires extensive experience, including amongst others calculating working load limits, a fine knowledge of the installation material being used, and periodic safety inspection of all installation material and the fixture. If you lack these qualifications, do not attempt the installation yourself. Improper installation can result in bodily injury. CAUTION! Be sure a qualified electrician performs all electrical connections.
Platinum Spot LED™ The Platinum Spot LED Pro™ provides a unique mounting bracket assembly that integrates the bottom of the base, the included “Omega Bracket,” and the safety cable rigging point in one unit (see the illustration below). When mounting this fixture to truss be sure to secure an appropriately rated clamp to the included omega bracket using a M10 screw fitted through the center hole of the “omega bracket”.
Platinum Platinum Spot Spot LED LED Pro™ Pro™ 7. UNDERSTANDING DMX DMX-512: DMX is short for Digital Multiplex. This is a universal protocol used by most lighting and controller manufactures as a form of communication between intelligent fixtures and controllers. DMX allows all makes and models of different manufactures to be linked together and operate from a single controller. This is possible as long as all the fixtures and the controller are DMX compliant.
Platinum Spot LED™ Be sure to follow the above figure when making your own cables. Do not use the ground lug on the XLR connector. Do not connect the cable’s shield conductor to the ground lug or allow the shield conductor to come in contact with the XLR’s outer casing. Grounding the shield could cause a short circuit and erratic behavior.
Platinum Platinum Spot Spot LED LED Pro™ Pro™ DMX-512 connection with DMX terminator A DMX terminator should be used in all DMX lines especially in longer runs. The use of a terminator may avoid erratic behavior in your DMX line. A terminator is a 120 ohm 1/4 watt resistor that is connected between pins 2 and 3 of a male XLR connector (DATA + and DATA -). This fixture is inserted in the female XLR connector of the last fixture in your daisy chain to terminate the line.
Platinum Spot LED™ channel number from which the fixture starts to “listen” to the digital control information sent out from the DMX controller. The allocation of this starting DMX address is achieved by setting the correct DMX address on the digital display located on the base of the fixture. You can set the same starting address for all fixtures or a group of fixtures, or set different address for each individual fixture.
Platinum Platinum Spot Spot LED LED Pro™ Pro™ 8. FIXTURE MENU On-Board System Menu: The Platinum Spot LED Pro™ comes with an easy to navigate, full color system menu. This next section will detail the functions of each command in the system menu. LED Control Panel: The control panel located on the base of the fixture allows you to access the main menu and make all necessary adjustments to the Platinum Spot LED Pro™.
Platinum Spot LED™ Personality Information Function Default settings shaded.
Platinum Platinum Spot Spot LED LED Pro™ Pro™ Reset Function Reset Default Effect Adjust Users Mode Set ON/OFF Reset All Reset Pan&Tilt Reset Colors Reset Gobos Reset Others Test Channel Manual Control Calibration User Mode Edit User Mode Select Programs Edit Program Memory Restore factory set.
Platinum Spot LED™ 8.1 Function Mode: 8.1.1 “Set DMX Address” - DMX address setting – This function is used to set or adjust the fixture’s starting DMX address. Every device controlled by DMX has to have a unique starting address. The addressing feature is what allows DMX to function properly. The DMX address of a fixture is what allows it to communicate with a controller properly.
Platinum Platinum Spot Spot LED LED Pro™ Pro™ 8.1.5 Music control This function is similar to the “Auto Program” described in the previous section with the exception that this function will advance the built-in program via sound. 8.2 Information: 8.2.1 Time information These functions will detail different time functions associated with the fixture. Current Time This function displays the running time of the fixture from the last power on.
Platinum Spot LED™ Clear Last Run This function will allow the “Last Run Hours” function be cleared and reset. L-Timer Password Use this function to enter the “Clear Lamp Time” password. Password is “038” Clear Lamp Time This function resets the lamp “ON” time to zero. Please reset the lamp “ON” time at every lamp replacement. This procedure tracks the lamp running time so the lamp can be replaced at the end of it’s recommended duty cycle. • Select “Clear lamp time” in the system menu.
Platinum Platinum Spot Spot LED LED Pro™ Pro™ is applied to the fixture 8.3.3 Lamp On Via DMX When engaged, this function will allow the lamp to be switched “on” via a DMX controller. Select “ON” to enable this function or “OFF” to disable it. 8.3.4 Lamp Off Via DMX When engaged, this function will allow the lamp to be switched “off” via a DMX controller. Select “ON” to enable this function or “OFF” to disable it. 8.3.5 Lamp On at Temp.
Platinum Spot LED™ DMX signal during normal operation. The default function is set to hold, in which the fixture will lock into the last DMX signal it received and remain in that position until it is turned off or begins receiving a new DMX signal. If the fixture is turned on without any DMX signal, the fixture will automatically go in to sound-active mode. Available settings are: “Close” – Shutter flags will close. “Hold” – Fixture will remain at it’s last settings.
Platinum Platinum Spot Spot LED LED Pro™ Pro™ original DS-250. Tilt speed will be the same as speed 2. Mic Sensitivity – This function makes the internal microphone more or less sensitive to sound. This function only works in conjunction with the sound active modes. The default setting is 70% and setting range from 0% to 99%. Hibernation – When activated, this function will automatically put the fixture in power stand-by mode after a defined period of time of no DMX activity.
Platinum Spot LED™ disabled as default. LOCK – This function allows you to lock the keys on the display to prevent menu tampering. With this function you can activate the automatic key lock function. If this function is activated, the keys will be automatically locked in 15 seconds from the last command. In order to deactivate or temporarily deactivate the key lock function, press the Mode/Esc Button for 3 seconds to regain access to the menu commands. 8.4.
Platinum Platinum Spot Spot LED LED Pro™ Pro™ previously listed reset commands to the home position. 8.6 Effect Adjust: 8.6.1 Test Channel – This menu function allows the user to select each individual fixture channel and test it’s function independently from the control board. 8.6.2 Lamp adjustment (manual control) – This function readies the fixture for lamp optimization in a simple single step procedure.
Platinum Spot LED™ board. Programs can be created and stored using the fixture’s control board or by using an external DMX controller. For detailed instructions on how to complete this task please see Section 12/ Page 39. 8.8.2 Select program – This function allows the user to select one of ten of the user defined built-in programs. This program is then accessed in “Function Mode” under “Program Run.” 8.8.3 Edit program – This function allows the user to edit the built-in programs. 8.8.
Platinum Platinum Spot Spot LED LED Pro™ Pro™ 9. DMX ADDRESSING Setting the DMX address - After the fixture is turned “ON” it will immediately complete a reset process that test all the fixture’s functions. When the reset process concludes the LCD will display the fixture’s current DMX. If the fixture is not receiving a DMX signal, the display will flash continuously. To set or adjust a DMX address, please follow the procedure below: 1.
Platinum Spot LED™ 7. Press MODE/ESC to return to the main menu. Controller Settings: 1. Set the DMX value of channel 1 to a value of 7. 2. Set the DMX value of channel 2 to a value of 7 or 8. When channel 2 is set to "7" you can adjust the starting address between 1 and 255. When set to "8" you can adjust the starting address between 256 and 511. 3. Use channel 3 to set your desired DMX starting address.
Platinum Platinum Spot Spot LED LED Pro™ Pro™ 10. OPERATION Operating Modes: The Platinum Spot LED Pro™ can operate in six different modes. This next section will detail the differences in the operating modes. • Auto Program Mode (Master) - The fixture will chase through the built-in programs, sending a DMX control signal to all other fixtures connect via DMX cables instruction for a synchronized light show. • Auto Program Mode (Stand-alone) - The fixture will chase through the built-in program.
Platinum Spot LED™ Control” submenu. See page 24 for the menu breakdown. Once in the “Music Control” submenu select “Alone” 10.2 Master/Slave Operation (Auto Program or Music Control): This function allows up to 16 fixtures to be linked together to provide a synchronized light show without the use of a controller. Only use this when linking several fixtures together for use without a controller. Any fixture can act as a “Master or a “Slave.
Platinum Platinum Spot Spot LED LED Pro™ Pro™ 11. WORKING WITH BUILT-IN PROGRAMS The fixture comes equipped with a built-in DMX recorder that allows custom programs to be installed and recalled directly from the fixture’s control board. Programs can be created and stored using the fixture’s control board or by using an external DMX controller. The following instructions will detail the procedures for using the on-board system menu as well as using a DMX compliant controller.
Platinum Spot LED™ - “PAN-Fine” – precision pan movement. - “TILT” – tilt movement. - “TILT-Fine” – precision tilt movement - “Move Speed” – adjust pan and tilt motor speed - “Gobo Wheel 1” – select gobos from gobo wheel 1 - “Gobo Rot. 1” – adjust gobo 1 indexing or rotation - “Gobo Wheel 2” – select a gobo from gobo wheel 2 - “Prism” – select a prism, prism macro, or frost - “Prism Rot.
Platinum Platinum Spot Spot LED LED Pro™ Pro™ of 64 scenes. Keep in mind that a scene can only be access when it is stored inside one of the 10 available programs. Follow the procedure below to build an internal program: • Access the main menu and toggle to “Edit Programs” which is menu function 8. • Then tap the “ENTER” button and toggle to “Program 1.” • When you get to the “Program 1” function tap the “ENTER” button. The screen will then change to Edit Steps 01.
Platinum Spot LED™ 12. DMX CHANNEL TRAITS: 17 Channels in 16-bit mode. In 8bit mode the “Pan Fine” and “Tilt Fine” channels are not used, thus converting the fixture into a 15-channel DMX fixture. In extended mode the fixture will use 22 DMX channels (second chart).
Platinum Platinum Spot Spot LED LED Pro™ Pro™ 50-59 60-69 70-79 80-99 100-119 120-139 140-159 160-179 180-199 200-119 220-255 7 5 8 9 8 6 10 0-127 128-189 190-193 194-255 0-255 0-13 14-27 28-41 42-55 56-69 70-83 84-97 98-111 112-127 128-143 144-159 160-175 176-191 192-207 208-223 224-255 Rot. gobo 5 Rot. gobo 6 Rot.
Platinum Spot LED™ 68-127 128-135 136-143 144-151 152-159 160-167 168-175 176-183 184-191 192-199 200-207 208-215 216-223 224-231 232-239 240-247 248-255 10 8 12 13 11 9 0-255 0-255 14 0-255 15 0-255 12 10 16 13 11 17 14 12 18 15 13 19 0-127 128-255 0-31 32-63 64-95 96-127 128-159 160-191 192-223 224-255 0-255 Backwards rotation from slow to fast Macro 1 Macro 2 Macro 3 Macro 4 Macro 5 Macro 6 Macro 7 Macro 8 Macro 9 Macro 10 Macro 11 Macro 12 Macro 13 Macro 14 Macro 15 Macro 16 Focus
Platinum Platinum Spot Spot LED LED Pro™ Pro™ 0-191 192-223 224-255 20 16 14 21 0-255 0-225 226-235 236-245 246-255 17 15 22 0-19 20-29 30-39 40-59 60-79 80-84 85-87 88-90 91-93 94-96 97-99 100-119 120-139 140-159 160-179 180-199 200-219 220-239 240-255 Max. diameter to Min.
Platinum Spot LED™ 13. ERROR CODES: When power is applied, the unit will automatically enter a “reset/test” mode. This mode brings all the internal motors to a home position. If there is an internal problem with one or more of the motors an error code will flash in the display in the form of “XXer” were as XX will represent a motor function. For example, when the display shows “Pan-ER,” it means there is some type of error with the pan motor.
Platinum Platinum Spot Spot LED LED Pro™ Pro™ Color-wheel error: The color wheel is not located in the default position after start-up or after a reset command. This message will appear after a fixture reset if the color wheel’s magneticindexing circuit malfunctions (sensor failed or magnet is missing) or there is a stepper motor failure (defective motor or a defective motor IC drive on the main PCB).
Platinum Spot LED™ driver circuit on the main PCB). The Iris wheel is not located in the default position after the reset. Focus-error: This message will appear after the reset of the fixture and if the magnetic indexing circuit malfunctions (sensor failed or magnet missing) or the stepping-motor is defective (or its driver circuit on the main PCB). The focus motor is not located in the default position after the reset. ©Elation Professional, Los Angeles Ca. 45 www.ElationLighting.
Platinum Platinum Spot Spot LED LED Pro™ Pro™ 14. CLEANING AND MAINTENANCE The following points have to be considered during the inspection: 1. Be sure all screws and fasteners are securely tightened at all times. Lose screws may fall out during normal operation resulting in damage or injury as larger parts could fall. 2. There must not be any deformations on the housing, color lenses, rigging hardware and rigging points (ceiling, suspension, trussing).
Platinum Spot LED™ 15. BUILT-IN WIRELESS RECIEVER The Platinum Spot LED Pro™ is equipped with an Elation WDMX Wireless DMX Receiver built-in. This receiver is fully compatible with your existing Elation Wireless DMX System or any WDMX compatible solution. 12.1 Working with the Wireless DMX (WDMX) System: • To turn the system “On” or “Off,” access the main menu and toggle to Personality Wireless DMX.
Platinum Platinum Spot Spot LED LED Pro™ Pro™ then begin to flash rapidly for about 5~ 10 seconds while the two system pair c) Once the fixture is paired with the transmitter (T1), the WDMX status indicators on the both the fixture and the transmitter will stop flashing and glow solid green. If the paring is unsuccessful repeat the process until the paring is secured.
Platinum Spot LED™ 16. GOBOS: ©Elation Professional, Los Angeles Ca. 49 www.ElationLighting.
Platinum Platinum Spot Spot LED LED Pro™ Pro™ 17. DIMENSIONAL DRAWINGS: ©Elation Professional, Los Angeles Ca. 50 www.ElationLighting.
Platinum Spot LED™ 18. CIRCUIT SCHEMATICS ©Elation Professional, Los Angeles Ca. 51 www.ElationLighting.
Platinum Platinum Spot Spot LED LED Pro™ Pro™ 19. 2-YEAR LIMITED WARRANTY A. Elation Professional® hereby warrants, to the original purchaser, Elation Professional® products to be free of manufacturing defects in material and workmanship for a period of two years, (730 days) from the date of purchase. This warranty shall be valid only if the product is purchased within the United States of America, including possessions and territories.
Platinum Spot LED™ identifying marks to that effect. E. Elation Professional® reserves the right to make changes in design and/or improvements upon its products without any obligation to include these changes in any products theretofore manufactured. F. No warranty, whether expressed or implied, is given or made with respect to any accessory supplied with products described above.
Platinum Platinum Spot Spot LED LED Pro™ Pro™ 20.
Platinum Spot LED™ Length of the base 13.75” / 35cm (Without Handles) Width of Head 18.5” / 47cm Height (head vertical) 25” / 63.5cm Weight (net) 15.5 Kgs / 34 Lbs Operating Noise Levels (Base level 46.8dB) Mode: Auto 1m = 55.9 dB Mode: High 1m = 56.2 dB Mode: Auto 1m = 51.6 dB (Lamp off) Ambient Operating Temperature -25˚C ~ 45˚ C Specifications subject to change without notice. ©Elation Professional, Los Angeles Ca. 55 www.ElationLighting.
Platinum Platinum Spot Spot LED LED Pro™ Pro™ Elation Professional 6122 S. Eastern Ave. Los Angeles, CA. 90040 323-582-3322 / 323-832-9142 fax www.ElationLighting.com / Info@ElationLighitng.com ©Elation Professional, Los Angeles Ca. 56 www.ElationLighting.