User manual
www.elationlighting.com
8 PLATINUM SPOT LED PRO II™ User Manual Ver 2
GENERAL GUIDELINES
• NEVER OPEN THIS FIXTURE WHILE IN USE!
• During the initial operation of this fixture, a light smoke or smell may emit from the
interior of the fixture. This is a normal process and is caused by excess paint in the
interior of the casing burning off from the heat associated with the lamp and will
decrease gradually over time.
• This fixture is a professional lighting effect designed for INDOOR / DRY LOCATIONS
ONLY on stage, in nightclubs, theatres, etc.
• Please make sure there are NO FLAMMABLE MATERIALS close to the fixture while
operating, to prevent any fire hazard.
• The fixture must be installed in a location with adequate ventilation, at least 1.5
feet (.5m) from adjacent surfaces. Be sure no air ventilation slots are blocked.
• DO NOT attempt installation and/or operation without knowledge how to do so.
• DO NOT permit operation by persons who are not qualified to operate this type
of fixture. Most damages are the result of operations by nonprofessionals.
• Consistent operational breaks may ensure the fixture will function properly for
many years to come.
• DO NOT shake fixture, avoid brute force when installing and/or operating fixture.
• Always install the fixture with an appropriate safety cable. When installing the
fixture in a suspended environment, always use mounting hardware that is no less
than M10 x 25 mm, also be sure the hardware is insert in the pre-arranged screw
holes in the bracket of the fixture.
• Use the original packaging and materials to transport the fixture in for service.
• DO NOT TOUCH the housing bare-hand during its operation. Turn OFF the power
and allow approximately 15 minutes for the fixture to cool down before replacing
or serving.