Specifications

PLATINUM WASH ZFX PRO XL™
©Elation Professional® 20 PLATINUM WASH ZFX PRO XL™
8. FIXTURE MENU
On-Board System Menu: The PLATINUM WASH ZFX PRO XL™ comes with an easy to
navigate system menu. This next section will detail the functions of each command in the
system menu.
LED Control Panel: The control panel located on the top, front of the fixture allows you to
access the main menu and make all necessary adjustments to the PLATINUM WASH ZFX
PRO XL™. During normal operation, tapping the “MODE/ESC” key once will access the
fixture’s main menu. Once in the main menu you can navigate through the different functions
and access the sub-menus with the Up and Down buttons. Once you reach a field that
requires adjusting, tap the ENTER button to activate that field and use the UP and Down
button to adjust the field. Tapping the Enter button once more will confirm your setting. Once
a setting is saved the display will briefly readout OK to confirm a new setting has been made
and locked into memory. You may exit the main menu at any time without making any
adjustments by tapping the MODE/ESC button.
MODE/ESC Button - To access the main menu locate the MODE/ESC button on the front of
the unit. Press this button to activate the system menu. Tap the UP button until you reach the
function you wish to change. When you reach the function you wish to change tap the ENTER
button once to select that menu function. When a function is selected the menu will begin to
flash, use the UP or DOWN button to change the function. Once your changes are made tap
the ENTER button yet again to lock the change in the system menu. To exit without making any
changes tap the MODE/ESC button.
The fixture contains a rechargeable battery back-up system that stores all setting and also
allows the menu to be accessed when the fixture is not connected to power. To access the
menu via battery power, press and hold the DC button for two seconds, this will activate the
menu. The display will automatically turn off approximately one minute after all menu
commands are completed.