User manual

Power Wash 250™
©Elation Professionals® Los Angeles, Ca. 90058 - www.ElationLighting.com - Page 33
4.1 Safety Regulations
• Always disconnect main power before attempting any service related
issues!
• Allow ample time for the lamp to cool (at least 20 minutes) before performing
any cleaning procedures.
• Never attempt operation with any of the protective covers removed!
4.2 Cleaning Frequency (rule-of-thumb)
Section Interval Procedure
Outside optic Weekly soft cloth and glass cleaning fluid
Color filter Monthly soft cloth and glass cleaning fluid
Beam shape Monthly soft cloth and glass cleaning fluid
Dimmer/Shutter Yearly vacuum cleaner, airbrush, etc.
Fan and air channel Monthly vacuum cleaner, airbrush, etc.
Reflector Yearly soft cloth and glass cleaning fluid
Lamp Never
Moveable parts Yearly suitable fatty oil
The above chart is a recommended cleaning schedule only. Cleaning frequency
depends on the environment in which the fixture operates (I.E. smoke, fog
residue, dust, dew). In clubs that observe heavier use, we recommend cleaning
on a more frequent basis. Periodic cleaning will ensure fixture longevity and
crisp lamp output.
Attention:
• Never allow optical parts come into contact with oil, dirt, or grime.
• Allow all parts to dry completely before attempt operation.
• Never clean the aspheric lens with water or other cleaners. The lens
should be changed at the first sign of ware, usually in about 1 – 2 years
(lens will begin to look cloudy). For lens replacement please contact
Elation technical support.
Cleaning the Optical System (recommended for authorized personal only)
1. Always disconnect main power before attempting any service related
issues!