User manual

©Elation Professionals® - www.elationlighting.com - TVL2000 II Instruction Manual Page 9
TVL2000 II System Menu
DIND
©Elation Professionals® - www.elationlighting.com - TVL2000 II Instruction Manual Page 10
TVL2000 II System Menu
System Menu. The TVL2000 II comes with an easy to navigate
system menu. This next section will detail the functions of each com-
mand in the system menu. Please read the next section thoroughly!
To access the main menu press the MENU button. Tap the UP or
DOWN buttons until you reach function you wish to change. When
you reach the function you wish to change press the ENTER button.
When a function is selected use the UP or DOWN buttons to change
the function settings. Once your changes are made press the ENTER
button, and then press and hold the MENU button for at least three
seconds to conrm and lock the change into the system memory. If
the MENU button is not pressed and held within eight seconds the
xture will automatically conrm and lock the change into the system
memory. To
exit without making any changes press the MENU button.
ADDR - DMX Address Setting.
1. First set the unit to your desired DMX Channel mode.
2. To set your address, tap either the MENU, UP, or DOWN buttons
until “ADDR” is displayed, press ENTER. “1” will now be displayed and
ashing.
3. Press the UP or DOWN buttons to nd your desired address.
When you have found your desired DMX address press ENTER, and
connect your DMX Controller.
CHND - Switch between the 3 DMX Channel Modes.
1. Press the MENU button until “CHND” is displayed, press ENTER.
Either “MOD 1” (2 Channel Mode), “MOD 2” (2 Channel Mode), or “MOD 3”
(3 Channel Mode) will be displayed
2. Press the UP or DOWN buttons to choose your desired DMX mode
and press ENTER to conm and exit.
MANU - Manually adjust the intensity of the LEDs.
1. Press the MENU button until “MANU” is displayed, press ENTER.
“LED1”, “LED2” or “DINN” will be displayed. LED 1 is warm white, LED 2
is cool white, and DIMM is the master dimmer for this mode.