Specifications

53
90cm 5 Burner Gas Cooktop
CG905DWACX1
Stainless Steel
Designer
90cm 5 Burner Gas Cooktop
CG905DWFCX1
Stainless Steel
Designer
Dimensions: W914 x D546 x H76 mm Dimensions: W914 x D533 x H50 mm
Burners: 5 including 1 wok burner Burners: 5 including 2 wok burners
Burner ratings: 0.9 – 3.6 MJ / hr Auxiliary burner
7.2 MJ / hr Semi rapid burner
16.3 MJ / hr Wok burner
10.5 MJ / hr Rapid burners
Burner ratings shown for Natural Gas connections only
Burner ratings: 3.6 MJ / hr Auxiliary burner
8.5 MJ / hr Semi rapid burners
15 MJ / hr Wok burners
Burner ratings shown for Natural Gas connections only
Performance: Innovalve technology, Electronic ignition, LPG and Natural
gas compatible, Cast iron trivets
Performance: Electronic ignition, Quick connect gas valve, LPG and
Natural gas compatible, Cast iron trivets
Cleaning: Easy clean cooktop design, Quick component removal Cleaning: Easy clean cooktop design, Quick component removal
Safety: Auto re-ignition system, 4 litres Spill containment, Flame
failure device
Safety: 2.5 litres Spill containment, Flame failure device
Controls: Cast alloy satin chrome control dials, Burner indicator
lights / Fault indication, Laser etched graphics
Controls: Cast alloy satin chrome control dials, Laser etched graphics
AMP Draw: 10A AMP Draw: 10A
Supply voltage: 230 – 240 Supply voltage: 230 – 240
Accessories: N / A Accessories: Wok stand
914m
m
76mm
5
4
6mm
Note: New Zealand and Australian Gas Installation Standards (NZ5261, AS5601) require a cooktop
to be installed so that the surface of any nearby combustible surface will not exceed 65°C above
ambient. Please check installation instructions for required clearances around the cooktop.
914m
m
50mm
533
mm
Note: New Zealand and Australian Gas Installation Standards (NZ5261, AS5601) require a cooktop
to be installed so that the surface of any nearby combustible surface will not exceed 65°C above
ambient. Please check installation instructions for required clearances around the cooktop.