Specifications

32
Fig. 9.1
PEN
L
1
(L2)
Fig. 9.2
ELECTRICAL FEEDER CABLE CONNECTION
The operations must be executed by a qualied technician.
To connect the supply cable:
• Remove the screws securing the cover “A”ontherearofthecooker(g.9.1).
• Feed the supply cable through the cable clamp “C”(g.9.1).Thesupplycablemust
be of a suitable size for the current requirements of the appliance; see the section
“Feedercablespecications”.
• Connect the wires to the terminal block “B”asshowninthediagramingure9.2.
• Take up any slack in the cable and secure with the cable clamp “C”.
• Replace the cover “A”.
Note: The earth conductor must be left about 3 cm longer than the others.
FEEDER CABLE SPECIFICATIONS
TYPE H05RR-F
Models EEC 863 ..
230V~3x1,5mm
2
(*) (**)
Models EEC 963 ..
230V~3x2,5mm
2
(**)
(*) Connection possible with plug and outlet
(**) Connection with wall box connection
A
B
C
230 V~