Product data
15
450 mm
650 mm
300 mm
20 mm
20 mm
500 mm
50 cm
50 cm
Fig. 6.1
Fig. 6.2
INSTALLATION
6
The cooker affords class “1” protection against overheating of surrounding surfaces.
The installation conditions, concerning protection against overheating of the surfaces adja-
cent to the cooker, must conform to Figs. 6.1 and 6.2.
A space of at least 2 cm must be left between the cooker and any adjacent furniture, which
must not exceed the height of the cooktop.
If the cooker is installed adjacent to furniture which is higher than the gas hob cooktop, a
gap of at least 30 cm must be left between the side of the cooker and the furniture.
The veneered syntetical material and the glue used must be resistant to a temperature of
90°C in order to avoid ungluing or deformations.
Curtains must not be tted immediatly behind appliance or within 500 mm of the sides.
If the cooker is located on a pedestal it is necessary to provide safety measures to prevent
falling out.
The appliance must be housed in heat resistant units.
The walls of the units must not be higher than work top and must be capable of resi-
sting temperatures of 75 °C above room temperature.
Donotinstaltheappliancenearinammablematerials(eg.curtains).
■ Class 1
Gas connection made
using rubber hose
which must be visible
and easily inspected
or using rigid or exible
metal pipe.