Product data

24
OPERATIONS TO BE EXECUTED
FOR THE REPLACEMENT OF THE
INJECTOR OF THE OVEN BURNER
• Lift and remove the lower panel inside
the oven.
• Remove the burner securing screw
(g. 7.6).
• Withdraw the burner as shown in gu-
re 7.7 and rest it inside the oven.
 Take care not to damage the wire to
the safety valve probe.
• Using a 7 mm box spanner, unscrew
the injector (indicated by the arrow in
g. 7.7) and replace it by the proper
one according to the kind of gas.
• Then replace the burner repeating the
above steps in reverse order.
Fig. 7.7
Fig. 7.6
Ring opening
PRIMARY AIR OF THE OVEN BUR-
NER
With a screwdriver untighten the two screws
(g. 7.8) and move forward or backward
the air ring to close or open the air ow,
according to the “Table for the choice of the
injectors”.
Light the burner and check the ames.
Fig. 7.8