INDUCTION COOKER Model: EIC-A2010S Owner’s Manual Please read this manual carefully before operating your set Retain it for future reference Record model number and serial number of the set See the label attached on the set and quote this information to your dealer when you require service For The Warranty Terms & Conditions, Please Refer To Warranty Certificate
IMPORTANT SAFEGUARDS 1. 2. 3. 4. 5. Read all instructions before using. Do not dismantle and refit parts or repair the induction cooker on your own. Do not contact the plug with wet hands. Do not let the power cord remains plugged when not in use. Do not use the appliance when the power cord is damaged or the plug is not properly inserted. 6. Never bend or bind the power cord or apply by excessive force, otherwise it may cause damage.
PRODUCT ILLUSTRATION CONTROL PANEL OPERATING THE APPLIANCE 1. Insert the plug to the power socket, and a buzzer sound “Beep” will be heard once, LCD will display “- - - -”, indicating the unit is energized. 2. Place the pan in the center of the hot plate. Press On/Off button to start the unit. LCD will display “0 0 0 0”. Press the heating button within 5 seconds, and the fan will starts running. The default power is 2000W.
seconds. 3. Press keep warm button to enter keep warm setting. The default temperature is 240°C. Keep warm temperature can be adjusted by pressing “+” or “—” button to select the temperature of: 60 , 100 , 140 , 180 , 220 , 240 . When the temperature rises above the temperature set, the program will in automatic protection mode. 4. On the state of heating or keep warm mode, you can set the time to shut-off the power by pressing timer button LCD will display “0 0 0 0”.
PRODUCT ADVANTAGE 1. High efficiency, energy saving and environmental protection: cooker body is heating part itself, so heat efficiency is very high and save energy greatly. When cooking food with induction cooker, there will be free of visible fire, smoke and waste gas, bear environment protection effect, safe and clean. 2. Wider applicable voltage range: the unit will automatically adjust the wattage according to the power voltage, so it could avoid the trouble resulting from the voltage fluctuation. 3.
When the temperature of the hot plate is too high, the power output of the cooker will stop automatically and long buzzer sound will be heard to alert you until the temperature returns to normal. 5. High voltage pulse protection During operation, when power supply receives a transient high voltage pulse (such as lightning strike), the cooker will stop operating for a while, and the cooker will resume automatically COOKING UTENSIL SELECTION 1.
2. Non-usable pans Heat-resistant glass, ceramic container, copper, aluminum pans/pots. Round-bottom pans/pots with bottom diameter less than 18.5cm. MAINTENANCE AND CARE 1. Please unplug the plug from the power socket after use. 2. Wipe the cooker body, hot plate and control panel with soft and wet cloth, neutral cleanser may be used for firm oil stain, and then wipe the remained residue with soft and wet cloth. 3. Never rinse the cooker directly with water or immense it in water.
setting. After 10 minutes, please check the LCD display whether it is operating. When grilling food or keep warm Check whether the bottom of the pan is mode; the temperature cannot be concavo-convex or the bottom center is concave. set. Whether the power indictor is switch on.
Page 8 of 8