MULTI-CYCLONE VACUUM CLEANER MODEL: EVC-B2014CY(RD) Owner’s Manual Please read this manual carefully before operating your set. Retain it for future reference. Record model number and serial number of the set. See the label attached on the set and quote this information to your dealer when you require service. For The Warranty Terms & Conditions, Please Refer To Warranty Certificate.
IMPORTANT SAFEGUARDS When using this appliance, basic precautions should always be followed, including the following: 1. Read all instructions before using. 2. Do not operate the appliance with damaged power cord or plug, after the appliance malfunction, or if it is dropped or damaged in any manner. Return the appliance to the nearest authorized dealer or after-sales service center for examination, repair, electrical or mechanical adjustment. 3.
PRODUCT DESCRIPTION DUST TANK: ACCESSORIES: 3
PRECAUTIONARY MEASURES If the floor brush, nozzle or the hose are blocked, disconnect the block-up item at once. Do not operate the vacuum cleaner close to Make sure your hand is dry before inserting heaters like radiators, cigarette butts, etc. the plug into the wall outlet.
(Fitting the extension tube and accessories) Insert the extension tube to the flexible hose by holding the handle. Fitting the floor brush to the extension tube. Ideal for cleaning on carpets and floors.
Cleaning using the accessories Crevice nozzle: For cleaning corners, baseboards and cushions. Multi-purpose brush: For cleaning furniture, blinds, book, lamp shades and shelves. It can be used as a sofa nozzle as well. OPERATING THE VACUUM CLEANER Cautions: Before operating, unwind a sufficient length of power cord and insert the plug into the wall outlet. A yellow mark on the power cord shows the ideal cable length. Do not expend the cord beyond the red mark.
Power cord rewind button To rewind the power cord, press the rewind button at the product body with one hand guide the cable and another hand to ensure that the cable does not whip causing damage. Adjustable speed control at the hose handle The suction power can be adjust by sliding the speed control button at the hose handle. Slide the control button to “Off” to stop operating. When finished cleaning, always power off the switch and unplug the plug from wall outlet.
CLEANING AND MAINTENANCE 1) To remove dust from the dust tank Press the dust tank release button. Pull out the dust cup by holding the dust tank handle. Press the dust tank (bottom) release button, then the collected dust will drop off from the bottom of the dust cup. Clean the filter by pressing the dust tank (top) release button. Remove the filter assembly from the dust tank and use soft brush or wipe using a soft damp cloth. Before storing the filter assembly, make sure it is dry and clean.
3) Cleaning the inlet and exhaust HEPA filter After removing the dust tank, remove the sponge and HEPA filter set (to remove the whole set in a case box). Remove the filter frame and pull out the sponge and HEPA filter from the case box. Cleaning the sponge and HEPA filter by using soft brush and rinse it under the tap water and dry it completely before using it again. This is a washable filter, we recommend to clean the filter to improve the suction power.
ENVIRONMENT-FRIENDLY DISPOSAL You can help to protect the environment! Please remember to respect the local regulations: hand in the non-working electrical equipments to an appropriate waste disposal centre.