EW 6080 DGT Washing Machine
Safety instructions 1 Warnings General Safety • Never place your machine on a carpet covered floor. Otherwise, lack of airflow from below of your machine may cause electrical parts to overheat. This may cause problems with your washing machine. • If the power cable or mains plug is damaged you must call Authorized Service for repair. • Fit the drain hose into the discharge housing securely to prevent any water leakage and to allow machine to take in and discharge water as required.
2 Installation the machine. Removing packaging reinforcement Tilt the machine to remove the packaging reinforcement. Remove the packaging reinforcement by pulling the ribbon. Opening the transportation locks A Transportation safety bolts must be removed before operating the washing machine! Otherwise, the machine will be damaged! 1. Loosen all the bolts with a spanner until they rotate freely (“C”) 2. Remove transportation safety bolts by turning them gently. 3.
Electrical connection Connect the machine to an earthed outlet protected by a fuse of suitable capacity. Important: • Connection should comply with national regulations. • The voltage and the allowed fuse protection are specified in the section “Technical Specifications”. • The specified voltage must be equal to your mains voltage. • Connection via extension cords or multiplugs should not be made. B A damaged power cable must be replaced by a qualified electrician.
4 Selecting a Program and Operating Your Machine Control panel 9 8 4 1 2 3 4 5 6 - 6 7 Spin Speed Adjustment Button Time Delaying Button Auxiliary Function Keys Start/Pause/Cancel Button Program Selection Knob Display 7 - Child-proof Lock Indicator* 8 - Program Follow-up Indicators 9 - On/Off Button * According to your machine’s model Turning the machine on Plug in your machine. Turn the tap on completely. Check if the hoses are connected tightly. Place the laundry in the machine.
Additional programs For special cases, there are also extra programs available: • Delicates You can wash your delicate clothes on this program. It has more sensitive washing movements and does not make intermediate spinning compared to “Synthetic” program. • Daily You can use this program to wash cottons and synthetics together. There is no need to sort them. • Eco Synthetics This program is suitable for clothes that are normally worn for a short time such as sportswear.
Max. Load (kg) Programme Duration (~min) Water Consumption (l) Energy Consumption (kWh) Prewash Quick Wash Rinse Plus Anti-Creasing Rinse Hold No Heat Program and consumption table Cottons 90 6 138 49 2.18 • • • • • • Cottons 60** 6 135 49 1.14 • • • • • • Cottons 40 6 129 49 0.66 • • • • • • Eco Active 40 6 167 49 0.87 Intensive 60 6 180 69 1.29 Eco Synthetics Sports 40 3 75 47 0.56 • Synthetics 60 3 103 50 0.
Auxiliary functions Auxiliary Function Selection Buttons Select the required auxiliary functions before starting the program. C Some combinations cannot be selected together. (Ex.: Pre-wash and Quick Wash. Warning signal on the selected auxiliary function will light up.
automatic spin correction system has been activated due to an excessive unbalanced distribution of laundry in the machine. Changing the selections after the program has started Turning the program knob while the program is in a normal flow will not change the program. Switching the machine to standby mode Press “Start/Pause/Cancel” button momentarily to switch your machine to the standby mode. Auxiliary functions can be cancelled or selected in accordance with the step the program is at.
Draining any remaining water and cleaning the pump filter Your product is equipped with a filter system which ensures a cleaner water discharge that extends pump life by preventing solid items such as buttons, coins and fabric fibers from clogging the pump propeller during discharge of the washing water. • If your machine fails to drain the water, the pump filter may be clogged. You may have to clean it every 2 years or whenever it is plugged. Water must be drained off to clean the pump filter.
6 Solution suggestions for problems Problem Program cannot be started or selected. There is water coming from the bottom of the machine. Machine stopped shortly after the program started. It continuously spins. Remaining time does not count down. It continuously washes. Remaining time does not count down. Cause Explanation / Suggestion Machine may have switched to self protection mode due to Reset your machine by pressing “Start/Pause/ an infrastructure problem (such Cancel” button for 3 seconds.
7 Specifications Models EW-6080DGT Maximum dry laundry capacity (kg) 6 Height (cm) 84 Width (cm) 60 Depth (cm) 50 Net Weight (kg) 64 Electricity (V/Hz.) 220-240 V / 50hz Total Current (A) 10 Total Power (W) 2000-2350 Spinning cycle (rpm max.) 800 Specifications of this appliance may change without notice to improve the quality of the product. Figures in this manual are schematic and may not match your product exactly.
