EWF 0861 A Washing Machine User’s Manual
1 Important safety instructions • This section contains safety instructions that will help protect from risk of personal injury or property damage. Failure to follow these instructions shall void any warranty.
• • • on top of each other reaches to approx. 180 kilograms. Place the product on a solid and flat floor that has sufficient load carrying capacity! Do not place the product on the power cable. Do not install the product at places where temperature may fall below 0ºC. Place the product at least 1 cm away from the edges of other furniture. hose (left) (max. 90 ºC) is for hot water inlet, blue hose (right) (max. 25 ºC) is for cold water inlet.
A Do not use any tools to loosen the lock nuts. Otherwise, they will get damaged. Electrical connection • • • To prevent flowing of dirty water back into the machine and to allow for easy discharge, do not immerse the hose end into the dirty water or drive it in the drain more than 15 cm. If it is too long, cut it short. The end of the hose should not be bent, it should not be stepped on and the hose must not be pinched between the drain and the machine.
production. It is not harmful for the product. Disposing of packaging material Packaging materials are dangerous to children. Keep packaging materials in a safe place away from reach of the children. Packaging materials of the product are manufactured from recyclable materials. Dispose of them properly and sort in accordance with recycled waste instructions. Do not dispose of them with normal domestic waste. Transportation of the product Unplug the product before transporting it.
Using detergent and softener Detergent Drawer The detergent drawer is composed of three compartments: - (1) for prewash - (2) for main wash – (3) for softener – (*) in addition, there is siphon piece in the softener compartment. 2 3 1 Detergent, softener and other cleaning agents • Add detergent and softener before starting the washing programme.
laundry, close to the lower part of the drum in future washings. the tablet or gel detergent without selecting C Use the prewash function. Using starch • Add liquid starch, powder starch or the dyestuff into the softener compartment as instructed on the package. • Do not use softener and starch together in a washing cycle. • Wipe the inside of the machine with a damp and clean cloth after using starch.
Tips for efficient washing Clothes Light colours and whites Colors Dark colors Delicates/ Woolens/Silks (Recommended temperature range based on soiling level: cold-40C) (Recommended temperature range based on soiling level: cold-40C) (Recommended temperature range based on soiling level: cold-30C) It may be necessary to pre-treat the stains of perform prewash.
4 Operating the product Control panel 1 2 3 1 - Programme Selection knob (Uppermost position On/Off) 2 - Programme Follow-up indicator 3 - Temperature Adjustment button Preparing the machine Make sure that the hoses are connected tightly. Plug in your machine. Turn the tap on completely. Place the laundry in the machine. Add detergent and fabric softener. Programme selection 1.
Additional programmes For special cases, additional programmes are available in the machine. Additional programmes may differ according to the model of the machine. • Cotton Eco You may wash your normally soiled durable cotton and linen laundry in this programme with the highest energy and water saving compared to all other wash programmes suitable for cottons. Actual water temperature may differ from the declared cycle temperature.
Programme and consumption table Water Consumption (l) Energy Consumption (kWh) Max. Speed*** Prewash Quick Wash Rinse Plus Anti-Creasing Rinse Hold Auxiliary functions Programme Duration (~min) 2 Max. Load (kg) EN Cotton 90 6 150 65 2.00 800 • • • • • Cold-90 Cotton 60 6 122 65 1.35 800 • • • • • Cold-90 Cotton 40 6 102 65 0.70 800 • • • • • Cold-90 Cotton Eco 60** 6 160 44 1.01 800 • 40-60 Cotton Eco 60** 3 130 37 0.
Auxiliary function selection Use the following auxiliary functions according to your daily needs. Select the desired auxiliary functions before starting the programme. Furthermore, you may also select or cancel auxiliary functions that are suitable to the running programme without pressing the Start / Pause button when the machine is operating. For this, the machine must be in a step before the auxiliary function you are going to select or cancel.
Starting the programme Press Start / Pause button to start the programme. Programme follow-up light showing the startup of the programme will turn on. no programme is started or no key is pressed C Ifwithin 1 minute during programme selection process, the machine will switch to Pause mode and the illumination level of the temperature, speed and loading door indicator lights will decrease. Other indicator lights and indicators will turn off.
Your machine will end the programme when you turn the Programme Selection knob; however, it does not drain the water inside. When you select and start a new programme, the newly selected programme will start depending on the step the previous programme was canceled in. For example, it may take in additional water or continue to wash with the water inside. on the step where the C Depending programme was canceled in, you may have to put detergent and softener again for the programme you have selected anew.
and pull the piece out towards yourself. If the filter cap is one piece, pull the cap from both sides at the top to open. can remove the filter cover by slightly C You pushing downwards with a thin plastic tipped tool, through the gap above the filter cover. Do not use metal tipped tools to remove the cover. Some of our products have emergency draining hose and some does not have. Follow the steps below to discharge the water.
6 Technical specifications EWF 0861 A Models (EN) 6 Maximum dry laundry capacity (kg) Height (cm) 84 Width (cm) 60 Depth (cm) 48 Net weight (±4 kg.) 59 220-240V~/50Hz Electrical input (V/Hz) 10 Total current (A) 2000-2350W Total power (W) Spin speed (rpm max.) 800 Stand-by mode power (W) 1.00 Off-mode power (W) 0.25 Technical specifications may be changed without prior notice to improve the quality of the product.
7 Troubleshooting Programme cannot be started or selected. • Washing machine has switched to self protection mode due to a supply problem (line voltage, water pressure, etc.). >>> To cancel the programme, turn the Programme Selection knob to select another programme. Previous programme will be cancelled. (See "Canceling the programme") Water in the machine. • Some water might have remained in the product due to the quality control processes in the production.