WASHING MACHINE MODEL: EWF-B8150D(WH) Owner’s Manual Please read this manual carefully before operating your set. Retain it for future reference. Record model number and serial number of the set. See the label attached on the set and quote this information to your dealer when you require service.
1 Important instructions for safety and environment This section contains safety instructions that will help protect from risk of personal injury or property damage. Failure to follow these instructions shall void any warranty. 1.
2 Installation Refer to the nearest Authorised Service Agent for installation of the product. To make the product ready for use, review the information in the user manual and make sure that the electricity, tap water supply and water drainage systems are appropriate before calling the Authorized Service Agent. If they are not, call a qualified technician and plumber to have any necessary arrangements carried out.
points. If any leaks occur, turn off the tap and remove the nut. Retighten the nut carefully after checking the seal. To prevent water leakages and damages caused by them, keep the taps closed when the machine is not in use. 1. Loosen the lock nuts on the feet by hand. 2. Adjust the feet until the product stands level and balanced. 3. Tighten all lock nuts again by hand. 2.5 Connecting to the drain • The end of the drain hose must be directly connected to the wastewater drain or to the washbasin.
3 Preparation 3.1 Sorting the laundry • Sort laundry according to type of fabric, colour, and degree of soiling and allowable water temperature. • Always obey the instructions given on the garment tags. 3.2 Preparing laundry for washing • Laundry items with metal attachments such as, underwired bras, belt buckles or metal buttons will damage the machine. Remove the metal pieces or wash the clothes by putting them in a laundry bag or pillow case.
C A The loading door is locked while a programme is running. The door can only be opened a while after the programme comes to an end. warning: In case of misplacing the laundry, noise and vibration problems may occur in the machine. 3.7 Using detergent and softener C When using detergent, softener, starch, fabric dye, bleach or limescale remover read the manufacturer's instructions on the package carefully and follow the suggested dosage values. Use measuring cup if available.
Using starch • Add liquid starch, powder starch or the fabric dye into the softener compartment. • Do not use softener and starch together in a washing cycle. • Wipe the inside of the machine with a damp and clean cloth after using starch. Using bleaches • Select a programme with prewash and add the bleaching agent at the beginning of the prewash. Do not put detergent in the prewash compartment.
4 Operating the product 4.1 Control panel 1 2 3 4 5 8 7 6 1 - Programme Selection knob (Uppermost position On / Off) 2 - Display 3 - Delayed Start button 4 - Programme Follow-up indicator 5 - Start / Pause button 6 - Auxiliary Function buttons 7 - Spin Speed Adjustment button 8 - Temperature Adjustment button 4.2 Preparing the machine C 4.4 Main programmes Make sure that the hoses are connected tightly. Plug in your machine. Turn the tap on completely. Place the laundry in the machine.
4.5 Additional programmes For special cases, additional programmes are available in the machine. C Additional programmes may differ according to the model of the machine. • Cotton Economic You may wash your normally soiled durable cotton and linen laundry in this programme with the highest energy and water saving compared to all other wash programmes suitable for cottons. Actual water temperature may differ from the declared cycle temperature.
4.9 Programme and consumption table Cotton 90 8 80 2.3 • • • • Cold - 90 Cotton 60 8 80 1.65 • • • • Cold - 90 Cotton 40 8 80 0.82 • • • • Cold - 90 Cottons Eco 60** 8 54 1.39 • 40-60 Cottons Eco 60** 4 47 0.97 • 40-60 Cottons Eco 40** 4 47 0.78 • 40-60 Intensive + 90 8 75 2.38 • * • 30-90 Curtain 40 2 67 0.5 * * • Cold - 40 Daily&Quick 90 8 57 2.1 • • Cold - 90 Daily&Quick 60 8 72 1.
4.10 Auxiliary function selection Select the desired auxiliary functions before starting the programme. Furthermore, you may also select or cancel auxiliary functions that are suitable to the running programme without pressing the Start / Pause button when the machine is operating. For this, the machine must be in a step before the auxiliary function you are going to select or cancel.
4.11 Starting the programme Press Start / Pause button to start the programme. Programme follow-up light showing the startup of the programme will turn on. C If no programme is started or no key is pressed within 1 minute during programme selection process, the machine will switch to Pause mode and the illumination level of the temperature, speed and loading door indicator lights will decrease. Other indicator lights and indicators will turn off.
4.16 Canceling the programme To cancel the programme, turn the Programme Selection knob to select another programme. Previous programme will be canceled. End / Cancel light will flash continuously to notify that the programme has been canceled. Pump function is activated for 1-2 minutes regardless of the programme step, and whether there is water in the machine or not. After this period, your machine will be ready to start with the first step of the new programme.
1. Close the taps. 2. Remove the nuts of the water intake hoses to access the filters on the water intake valves. Clean them with an appropriate brush. If the filters are too dirty, take them out by means of pliers and clean them. 3. Take out the filters on the flat ends of the water intake hoses together with the gaskets and clean thoroughly under running water. 4. Replace the gaskets and filters carefully in their places and tighten the hose nuts by hand.
6 Technical specifications Models (EN) Maximum dry laundry capacity (kg) Height (cm) EWF-B8150D(WH) 8 84 Width (cm) 60 Depth (cm) 56.5 Net weight (±4 kg.) Electrical input (V/Hz) 70 220-240V~/50Hz Total current (A) 10 Total power (W) 2000-2350 Spin speed (rpm max.) 1200 Stand-by mode power (W) 1.35 Off-mode power (W) 0.
7 Troubleshooting Programme cannot be started or selected. • Washing machine has switched to self protection mode due to a supply problem (line voltage, water pressure, etc.). >>> Press and hold Start / Pause button for 3 seconds to reset the machine to factory settings. (See "Cancelling the programme") Water in the machine. • Some water might have remained in the product due to the quality control processes in the production. >>> This is not a failure; water is not harmful to the machine.
